Ashly Audio, Inc.
|
847 Holt Road
|
Webster, New York 14580-9103 USA
|
US toll free: +1-800-828-6308
|
tel: +1-585-872-0010
|
fax: +1-585-872-0739
|
info@ashly.com
|
sales@ashly.com
|
www.ashly.com
5-Year Warranty
Hand-built in
Webster, NY
FR-8 and FR-16 are Ethernet devices that provide fader-based
remote level control for Ashly products having DSP capa-
bilities. The FR-8 controls up-to eight user assigned inputs,
outputs, or mixer outputs, and the FR-16 controls up-to 16.
Both models are powered using Class-2 IEEE 802.3af Power
over Ethernet (PoE), or by an external PoE injector when
PoE is unavailable. Ethernet communication with this device
is made by wiring it with standard Cat-5 cable terminated
with an RJ-45 connector through an Ethernet network router,
switch, hub, or patch panel to a Windows™ PC running
our Protea™ ne Software v5.10 or higher. Each connect
to Ethernet using a standard RJ-45, as well as Neutrik’s
etherCON™ heavy duty RJ-45 and will automatically assign
their IP address.
Each channel fader can control input gain, output gain, or
mixer gain levels as assigned in software. The master fader
provides an overall level control for user assigned faders, or
can be disabled. Assignable fader scaling allows the user to
place an upper and lower limit on the range of level control
for each individual fader. A clear window is provided above
and below each fader for the insertion of user defined labels,
available on the Ashly website as a document template.
The FR-8 will mount to a standard 4-gang US electrical
wall box, and the FR-16 will mount to a modular 7-gang
US wall box. Alternately, the units can be mounted to a
flat surface with a cutout, or can be used as a freestanding
desktop device. On the rear panel, a Euroblock contact
closure can be connected to a keyed switch to lockout
all front panel controls, preventing any unwanted changes.
FR
REMOTES
N
etwork
r
emote
C
oNtrols
©2014 All features, specifications and graphical representations are subject to change without notice. Ashly Audio is a division of Jam Industries, Ltd. DS-1 1213
Specifications
Common
Max Data Cable Length
100 meters (328 ft) from the
nearest router, hub, or switch
Connections
Euroblock, XLR male
Environmental
40–120 deg. F (4–49 deg, C)
Power Requirements
Class 1 IEEE 802.3af
Power over Ethernet (PoE)
FR-8
Mounting
4-ganged wall box (US), panel
cutout, desktop
Dimensions
9"W x 4.8"L x 0.9"D
(229mm x 122mm x 23.9mm)
Unit Weight
2.3lbs (1.04kg)
Shipping Weignt
4lbs (2kg)
FR-16
Mounting
7-ganged modular wall box (US),
panel cutout, desktop
Dimensions
15” W x 4.8" L x 0.9" D
(381mm x 122mm x 23.9mm)
Unit Weight
3.8lbs (1.72kg)
Shipping Weight
5lbs (3kg)
Compatible Ashly Products
Power Amplifiers
nXp Power Amplifiers
PEMA™ Protea-Equipped Media Amplifiers
ne Series, Two-Channel Power Amplifiers w/ DSP
ne Series, Multi-Channel Power Amplifiers w/ DSP
Signal Processors
ne Series, DSP Processors 4400/4800/8800
ne24.24M Matrix Processor
Indicator Functions
BLUE LED
Power
Push-Button LEDs (Mixer Mode & I/O Level Mode)
RED
Mute
GREEN/AMBER
Signal Level
Push-Button LEDs (A/B Source Select Mode)
RED
Source "A"
GREEN
Source "B"
Please Note: 1) Level and Mute indicators are disabled in A/B
Source Select Mode. 2) Continuous flashing RED in either mode
indicates communications with the target device has been
interrupted.