FEATURE MODULE 2 UPDATE
THIS PAGE UPDATES THE FOLLOWING
MERLIN™ CS
CUSTOMER DOCUMENTS:
ADMINISTRATION MANUAL:
MODELS 1030 AND 3070 WITH FEATURE
MODULE 2, ISSUE 1
USER'S GUIDE:
MODELS 1030 AND 3070 WITH FEATURE
MODULE 2, ISSUE 1
ATTENDANT'S GUIDE:
MODELS 1030 AND 3070 WITH FEATURE
MODULE 2, ISSUE 1
SYSTEM ADMINISTRATORS:
PLEASE READ THIS INFORMATION AND KEEP
IT WITH YOUR ADMINISTRATION MANUAL FOR FUTURE REFERENCE
ASSIGNING DIAL ACCESS TO POOLS (Administration Manual page
28):
Some voice terminals in your system may be equipped with an
Automatic Multipurpose Adapter, a Manual Multipurpose
Adapter, or a General Purpose Adapter. These adapters allow
you to connect to your MERLIN Communications System such
external devices as computers, facsimile machines, and
answering machines. If you wish to dial calls from these
devices, and have Dial Access to Line Pools, you must first
do one of two things. On the voice terminal with the
adapter attached, you must assign either a personal line or
one of your line pools to a particular button. This
personal line or assigned pool should be the first entry in
the Automatic Line Selection sequence.
SETTING UP ALLOWED LISTS (Administration Manual page 35):
Please disregard the shortcut described in the NOTE section.
If you have a sequence of several new entries for the same
list, it is necessary to dial #5 and the list number for
each entry. If you have a printer connected to your system
for SMDR, you can get a printout of each list. To do so:
●
●
●
●
●
Touch Adm Misc
Dial # 5
Dial the list number
Dial any number 0 through 9
Dial # 900
COMCODE 845 660 133
984-533
