AWM-A13H Page 1 of 3
Installation Guide
AWM-A13H
AWM 130 Arm Heavy Duty
IMPORTANT INFORMATION
!
Please ensure this product is installed as per these installation instructions.
!
Do not remove or throw away the plastic sleeve on the channel clamp.
!
The manufacturer accepts no responsibility for incorrect installation.
! This product is compatible with Atdec AWM Series products
except
the Wall Channel products (including AWM-W6
and AWM-W35)
!
Curved monitors, deep devices (such as all-in-one PCs), VESA mounted accessories (such as mini PC brackets and mounts),
and offset VESA locations exert additional leverage that can exceed the capacity of the mount even though the monitor
weight may be within the stated range. Please contact Atdec if you would like further information.
COMPONENT CHECKLIST
D
Screw
M4x16mm
(x4)
E
Screw
M4x12mm
(x4)
C
Screw
M4x25mm
(x4)
F
Spacer
(x4)
G
Security
screw
(x4)
H
4mm
Hex Key
(x1)
B
Channel Clamp
(x1)
A
Heavy Duty Tilt Head
(x1)
REQUIRED TOOLS
WEIGHT RANGE
Flat Monitors
0 - 18kg
(0 - 40lbs)
Curved Monitors
0 - 12kg
(0 - 26.5lbs)
• Phillips Head Screwdriver
Monitor weight should be within
the weight range of all modular
elements that make up the complete
monitor mounting solution.
