AE988/AE988D/AE970/AE970D
User Manual
Soldering Station
AE988/AE988D/AE970/AE970D 电焊台
使用说明书
Packing List
Product Specification
Safety and Precautions
Using Method(AE988D/AE970D)
Main unit: 1pc
Handle: 1pc
Iron stand
:
1pc
User manual: 1pc
Brass wool: 1pc
Model No.
AE988
AE970
AE970D
AE988D
Total Power
Power consumption
Tip to ground
impedance
Tip to ground voltage
Heating element
Cable length
Weight
70W
70W
80W
80W
Main Unit
Handle
25VAC
79g
79g
65W
75W
75W
65W
<2Ω
<2mV
1.2m
Note: specifications and appearance are subject to change for product improvement without prior
notice
PTC ceramic
heater
Integrated tip
PTC ceramic
heater
200
－
480
℃
(392-896
℉
)
±1
℃（
±1.8
℉）
{
〉
200
℃
(400
℉
)}
50
－
500
℃
(122-932
℉
)
150
－
550
℃
(302-1022
℉
)
Output voltage
Temperature
range
Temperature
stability
Dimension
weight
（
power cable
excluded
）
The precautions in this manual are divided into the following [warning] and [attention].
Please fully understand the content.
Warning: misuse may cause death or serious injury to the user
For your own safety, please strictly abide by the following precautions
Please strictly observe the following precautions, otherwise it may cause injuries or death
!
Note: misuse may cause injury to users or substantial damage to objects involved
!
● Do not touch the soldering iron tip or the metal part around it while using
● Do not use it around combustibles
● Inform the people around of the potential risk caused by high temperature
● Turn the power off when not in use
● Before replacing parts or tip, turn off the power and wait till the iron tip cools down
● Do not use this product if you are inexperienced or have no sufficient necessary knowledge
without the guidance of related qualified personnel
● Please keep it out of reach of children
● If the power cord is damaged, please ask the manufacturer or its service agent or similar qualified
personnel to repair it, so as to avoid personal injury or damage to product
● Do not use this product for works other than soldering
● Do not hit the handle hard for removing the tin on the iron tip
● Do not modify this product
● When replace parts, must use original ATETOOL parts
● Do not soak the product in water or use it with wet hands
● Unplug it properly after using
● Smoke will be emitted during soldering, please use it in open space
● Do not engage in other dangerous acts with this product
Panel display:
LED segment: digital display
Indicator: indicates the statement of heater (light on/off means power on/off)
Function key: function operation
Knob: to adjust temperature
Calibration hole: for calibrate the temperature
After switching on, indicator lights up and LED segment displays for 1 second, now power is on.
And then it displays the temperature unit or for 1 second, so you know which unit is used
right now. If the standby function is enabled in this soldering station, will be displayed for 1 second
to show standby function is available. Then displays the set temperature for 1.5 seconds, and finally displays
the real time temperature. When the temperature is stable, indicator will flash.
After use, please clean the soldering iron tip and apply new solder on it.
Note: when not in use, please put the soldering iron on the holder. If it won’t be used for a while, please cut off
the power supply.
1.Operation and display instructions
2.Turn on the power switch
3.After use
First press function key, in the meanwhile switch on the power, till LED segment displays , release
the function key, now the temperature unit changes. If it was Fahrenheit, now switch to Celsius, and vice versa.
4.Temperature unit conversion
Temperature range
AE988D
：
50-500
℃（
122-932
℉
）
AE970D
：
150-550
℃（
302-1022
℉
, note: as LED segment shows only 3 digits, 1022 will be displayed as A22,
“A” represents digit “10”
）
Temperature adjusted by knob.
5.Temperature adjustment
Temperature locking function on and off:
1)Turning the knob to adjust the temperature to be set.
2)Long press the function key till is displayed.
3)Now LEd segment displays or
4)Turn the knob to set the locking function to be or
5)Press the function key or wait for 10s to automatically save to complete the setting.
6)When the temperature is locked, adjusting the knob does not change the setting temperature, it will display
for 1 second to show that the current temperature is locked.
8.Temperature locking function:
1) Press and hold the function key till the the screen displays , to enter the brightness setting.
2) Show the current digital display brightness level - .
3) Adjust the brightness level through the knob: gear 1-6.
4) Press the function key or wait for 10s to automatically save to complete the setting.
6.Screen brightness setting
Standby function on and off:
1)Press and hold the function key till display on LED segment to enter the standby function on/off setting:
2)Display the current setting or
3)Adjust by knob: or to turn on/off the standby and sleep function.
4)Press the function key or wait for 10s to automatically save to complete the setting.
Standby function
1)When standby function is turned on, the soldering station will enter standby mode after not in use for 10 minutes.
2)In standby mode, LED segment displays and temperature drops to 250
℃
(482
℉
).
3)When any operation is detected, such as using the soldering iron, adjusting knob or pressing the function key,
it will return to the work mode.
4)When in standby mode, if no further operation is detected for 10 minutes, it will enter sleep mode.
Sleep function:
1)That short press the function key or long time in standby mode can make it enter sleep mode:
2)When entering sleep mode, screen displays and heating is turn off.
3)Press the function key to return to normal heating work mode.
7.Standby and sleep functions
!
When power is on, the temperature of the soldering iron tip might reach to
50 ~ 550
℃
(120 ~ 1022
℉
).
Misuse may cause burns and fire, please strictly observe the following precautions:
Warning
1
2
3
Knob
Indicator
Calibration hole
LED segment
Function key
Socket
Main unit（AE988/AE970)
Main unit（AE988D/AE970D)
Iron stand
Handle
Brass wool
User manual
Integrated tip
148x120x85mm
1.32kg
1.32kg
1.33kg
1.334kg
68g
68g
.
.
