HOW TO REPLACE SPINNER (HA8801)
Remove the control top from the arcade.
Step 1
Use the 2.0 hex key to remove the spinner.
Step 2
Turn the control top upside down and remove
the screws on the bottom of the control top.
Step 3
Open up the control top and pull out the pinball
kit cable carefully.
Step 4
Disconnect the cables on the spinner that
you’d like to replace.
Step 5
Use a screwdriver to loosen the screws.
Step 6
Images and instructions are for reference only and subject to change. © 2021 AtGames.
Tools you need:
．
Phillips screwdriver
．
2.0 hex key
Left Spinner
Right Spinner
Left Spinner
Right Spinner
