Guarantee
Your Berkshire 400 Plus telephone is designed and
manufactured to exacting quality standards. This
enables ATL Telecom Limited to offer a 10 year
guarantee from the date of purchase. This guarantee
protects against faulty material or workmanship,
applies to the UK only and is not transferable.
The terms and conditions under which the guarantee
will be valid are as set out below.
Misuse or any modi
fi
cation carried out to
the telephone, or operation other than in
accordance with the instructions supplied,
will invalidate the guarantee.
Damage arising from incorrect installation,
accidental damage or consequential loss,
are not covered under the guarantee.
In the event of a fault developing during
the period of the guarantee, the complete
telephone should be returned to your
supplier, adequately and safely packed,
together with proof of date of purchase.
The liability of ATL Telecom Limited will
be limited to the cost of repair or complete
replacement of the same defective
instrument, at the discretion of the
company. In the event that the same item
is not available, a suitable alternative will be
offered.
The terms of this guarantee do not affect
your statutory rights.
Manufacturer’s Declaration
ATL Telecom Limited declares that this product
conforms with the essential requirements of the
‘R&TTE directive 1999/5/EC’
Note: A copy of the Declaration of Conformity is
available upon request from ATL Telecom Limited.
ATL Telecom Limited,
Lakeside, Fountain Lane,
St Mellons,
Cardiff
CF3 0FB
Telephone: 0330 333 8250
Facsimile: 0330 333 8251
www.atltelecom.com
1/433/001/610 Issue 02 April 2010
1.
2.
3.
4.
5.
Berkshire 400 Plus
Thank you for choosing a Berkshire 400 Plus telephone. You have selected
a carefully designed telephone that incorporates the very latest technology,
offering a stylish instrument and providing many years of excellent service.
This booklet will ensure you obtain the best use of your telephone.
PAUSE TIME ADJUSTMENT
The ‘PAUSE’ key may be con
fi
gured via the keypad
to represent 1 of 4 time periods (1~4 sec.). In all
cases, press ‘SET’, ‘PAUSE’, followed by a numeric
key (1~4 to set the time required). Press ‘SET’ to
fi
nish. Default = 1 sec.
TBR TIME ADJUSTMENT
Transfer break times may be adjusted from
100~600ms in increments of 100ms. In all cases
press ‘SET’, ‘TRANSFER’, followed by a numeric
key (1~6) then SET to
fi
nish. Default = 100ms.
PROGRAMMING PORT
The Berkshire 400 Plus has an unidenti
fi
ed port,
alongside the other con
fi
guration switches, at the
rear of the telephone. Programming of this port is
limited to technicians trained in its use.
Help
NO DIAL TONE
Check that the telephone plug is fully inserted in
the socket
If it is, try connecting the telephone into another
socket, if available. If dial tone is now heard, the
original socket is faulty.
Alternatively, try connecting another telephone
into your socket. If this telephone gives dial tone,
then your new telephone is probably faulty.
TRANSFER/RECALL KEY NOT WORKING
Change the recall selector switch setting (T/E).
If the transfer operation is now satisfactory, the
problem is resolved.
Compliance Notes
The Berkshire 400 Plus may be connected to the
following types of installation:
Direct Exchange Lines (DEL)
Compatible Private Automatic Branch
Exchanges (PABX). Please contact the
supplier of your Berkshire 400 Plus to
con
fi
rm compatibility with your PABX.
Whilst the Berkshire 400 Plus is compliant as an
extension to a compatible PABX system, it cannot be
guaranteed to operate under all possible conditions
of connection. Any case of dif
fi
culty should be
referred in the
fi
rst instance to the supplier of your
telephone.
•
•
•
•
1.
2.
User Guide
