DAY/NIGHT SYSTEM
1341 San Mateo Ave,
South San Francisco, CA 94080.
Tel: 800-910-2862, 650-989-5100,
fax: 650-875-0129
www.atncorp.com
e-mail: sales@atncorp.com, info@atncorp.com
Representing the latest advancement in Night Vision optics, the ATN
PS40 gives your daytime scope Night Vision capability in a matter of
seconds.
The ATN PS40 mounts in front of a daytime scope to enable nighttime
operation. No shift of impact, no need to rezero nor change of eye
relief occurs. The ATN PS40 uses the latest in image intensifier tube
technology for outstanding resolution and performance.
Precision optical alignment is essential for a front sight system to work
properly. This is why each ATN PS40 is individually tested and aligned
on an optical scale by our engineers to provide perfect alignment.
The ATN PS40 is one of the most compact and lightweight NV systems
in its class, at only 840 grams.
Easily changes daytime scope to Night Vision
Mounts in front of daytime scope, no re-zeroing required
Multi-coated all-glass optics
Fast catadioptic front lens system
Equipped with remote control
Powered by a single alkaline AA or 123A lithium battery.
Battery life check system.
Large 40 mm eyepiece/output window
Included Quick Release Mount
Optional Scope Mounting System for coupling to the objective of
the day scope (47...58,7 mm diameter)
Automatic Brightness Control
Bright Light Cut-off System
Resistance to severe conditions
1
ATN PS-40 NV Front Sight
2
Objective Lens Cap
3
Light Suppressor
4
Output Lens Cap
5
Operating Manual
6
Battery CR123A, Lithium
7
Remote Control
8
Shipping /Storage Case
9
Quick Release Mount
10
Platform Ring
11
Infrared Illuminator IR450
Export Warning: These products are subject to one or more of the export control laws and regulations of the U.S. Government. Pending the model these products are under the control jurisdiction of
either the US Department of State or the US Bureau of Industry and Security US Department of Commerce. Export without proper licensing or consent is strictly prohibited.
PS-40 INSTALLED ON MIL-STD-1913
RAIL FORWARD OF DAYSCOPE
PS-40 INSTALLED ON DAYSCOPE
OBJECTIVE LENS
PS-40 INSTALLED ON
B.A.M. system
BASIC KIT INCLUDES
1
2
3
4
5
6
7
8
9
10
11
PS40-3P (MG)
Manual Gain Control
