background image

2

              AT-689A

User Manual

1

1
2
3
4

5

6
7
8
9

power button

LED segment display 

Soldering wire holder
Temperature adjustable 
knob button

Tip cleaner location

Item No.

Voltage

Power

Temperature 

range

Adjustable 

method

Temperature 

unit

Display method

Temperature 

stability

  AT-689A

120/230V AC

 68W

Knob

80°C~480°C

LED segment 

° °

C/ F

2℃

±

1. 

power button

Turn the power on, adjust to the needed temperature by turning knob, the LED segment 

will display the real temperature value of the soldering tip after 3 seconds.

 

 

 

2. Temperature Setting

When this product is on power, its temperature can be adjusted easily by turning the knob.

 

The setting temperature value will be display when turning the knob, the real temperature 
of soldering tip will be displayed 3 seconds after done turning.

 

Temperatur

e range is 80~480℃

.

480

350

480

Set the 

 

temperature

Actual-measured 
temperature value

It heats up to the setting

 

 

temperature

3

4

The design of this product(including internal software) and its accessories is under 
the protection of relevant state laws. Any violation o f the r elev ant rights o f our 
company will be subjected t

    o legal sanctions. Users shall consciously abide by the 

relevant state laws when using this products.

Copyright information

We will take no responsibility for any personal injury or property damage 
caused by reasons other than the product quality problem, w  

 hi  c h m a y i n c l u d e 

force majeure (natural disasters, e t c ) o r p e r s o n a l misuse or negligence during the

     

     

   

operation of this product. This user manual is organized, compiled and released 

 

by

 according to the

latest product features. We will not be responsible for further notice of the

 

subsequent  improvement of the product and this manual.

Disclaimer

The soldering iron needs to be tested before it leaves the factory, 
so the soldering tip may cover a small amount of tin, and the 
casing will be slightly yellowing, which is a normal phenomenon.

Soldering Station

Users are required to have basic knowledge and common sense for electrical

 

operations before using the prod uct. Minors shall use the product under the 
guidance of a professional or guardian.

3.Essential knowledge for users

Packing list

To avoid electric shock or injury to the human body or fire hazard, t h e f o l l w i n g b a s i c r u l e s  

must be observed when using the equipment. In order to ensure personal safety, only parts

and accessories approved or recommended by the original factory can be used, otherwise

serious consequences may occur!

Misuse of this product may lead to serious injury to the user or material 

damage to the objects involved.

Caution

Essential knowledge for users

Safety precautions

WARNING

When this product is in used, the soldering iron tip with temperature up to 80-480

may cause burns to the user or cause a fire due to improper use. So users shall strictly 

observe the following rules: 

Keep this product away from inflammable substance.

Keep the product out of children’s reach.

Do not use this product if you are inexperienced or have no sufficient necessary 

knowledge without the guidance of related professionals.

Do not use this product under wet environment or with wet hands in case of electric 

shock.

Do not modify this product or its accessories without authorization.

Please turn off the power before replacing parts, do not touch the soldering iron tip

until it completely cools down.

Please use accessories from original factory when replacing the product parts.

Make sure to turn off the power switch after using.

 

·

 The handle structure is ergonomically designed for comfortable grip

 

·

 The heating wire and sensor are made of PTC material, which is quick in 

    temperature rise and precise in temperature control
 

·

 Auto-standby, auto-shut down is available

 

·

 Using 3 cored power cable

Features

 ·

 This product designed with LED segment display

 

·

 MCU controlled temperature calibration with PID system equipped, adjust 

    temperature by knob button, easy to operate

 

·

 Combined soldering station with soldering iron holder

Main unit (including machine, power cable and handle)

x

1pc

Soldering wire holder

 x

 1pc

User manual

 x

 1pc

Specification

Appearance and control panel

Operational guide

Temperature unit switch
/ temperature lock
Soldering handle
Soldering iron holder 

Soldering tip slot

1

2

3

4

5

6

7
8

9

Shenzhen ATTEN Technology Co., Ltd. Electronic Tools Branch

Reviews: