background image

Summary of Contents for TX8201

Page 1: ...1 Fortitude Valley QLD 4006 Ph 07 38521312 Fax 07 32521237 221277 Middleborough Road Box HillVlC 3128 PO Box 151 Blackburn South VIC 3130 Ph 03 9890 7477 Fax 03 9890 7977 WA SA TAS 299 Fitzgerald Street West Perth WA 6005 PO Box 404 North Perth WA 6906 Ph 08 92284222 Fax 08 92284299 Electronic Concepts Pty Ltd 76 George Street Thebarton SA 5031 PO Box 7034 Hutt Street Adelaide SA 5000 Ph 08 823494...

Page 2: ...x level for each channel is reached The sensitivity of auxiliary inputs 7 and 8 is 180 mV for a I volt output Mastef Left Right Output The master Left and fught controls should be adjusted to set the overall mixer level for each output channel based on the individual levels already set via the input channel gain controls Start with the output controls set at approximately the Level 5 position and ...

Page 3: ... channels I and2 While the tone generator function is as default set up to be present on both the master outputs and the direct outputs of channels l 6 it can be disabled for all or any of the direct outputs via an internal dip switch see the Intemal Adjustments section of this manual for more details A trim pot R104 which is located on the pcb behind the left channel master output may be adjusted...

Page 4: ...ded for each of the first 6 channels Th jumpers are lqcated near the front of the unit When in the ON position signal from that channel is fed to both the master outputs an the direct outputs When the switch is in the OFF position signal from that channel is fed to the direct line level output only Mic Line Switch for Channels 1 6 A four position dip switch is located on the main board behind each...

Reviews: