eSMART K-ART
Location sound cart dual battery power distribution system with universal fuel
gauge
Version 1.2 Updated 14/10/2019
The
AUDIOROOT eSMART K-ART
is a low footprint power distribution box with a total of
16
direct DC power outputs
and
4 x USB 5V ground isolated outputs
. The K-ART includes 10 led
illuminated pushbutton power switches, a main pushbutton power switch and
2 battery fuel gauges
.
Like it’s little brother
eSMART BG-DU
the
K-ART
is fully compatible with
any type of battery
ranging
from 9 to 18V. When used with our eSMART Li-xxWh or LiFe-xxxWh batteries the K-ART provides full
battery informations without any calibration routine.
This product was designed for use on small to medium size
location sound carts
. The power
distributor can be connected to 2 batteries at once. The 2 batteries will discharge simultaneously thru an
integrated ideal diode. These batteries can be of any type of chemistry
(SLA, NI-MH or LI-ION) and the 2
fuel gauges provide all the informations required to monitor the batteries state of charge (voltage,
current, power, etc…).
The
eSMART K-ART
uses internal coulomb counters and a calibration routine to measure each
battery’s true capacity and display it’s remaining capacity in real time. This power distributor is also fully
compatible with our full line of smart batteries. When plugging an AUDIOROOT eSMART battery to the K-
ART the user will have access to all the battery’s information without the need to perform any type of
calibration.
Key features :
•
10 switchable DC power paths
via led illuminated push button switches (on/off state of each
switch is stored and recalled automatically on each power up)
•
1 main power
illuminated push button switch
•
12 x HRS 4
DC power outputs (2 on the front, 10 on the rear of the unit, all Hirose outputs are
switched on and off by pairs)
•
4 x XLR 4
DC power outputs (1 on the front, 3 on the rear of the unit). Each XLR 4 output has it’s
own power switch
•
4 ground isolated USB ports
(allways on). 2 outputs are located on the front of the unit and 2
outputs are located on the rear of the unit. The K-ART can source up to a total of 3Amps on the 4
USB ports.
•
Real time SOC battery monitoring
: remaining capacity (%), run time estimation, battery
voltage, power consumption, power and coulomb counter
•
Polyswitch
2.5A
resetable fuses on each
output
•
Polyswitch
8.0A
resetable fuses on each
battery input
•
A
blinking LED
for each battery indicates when the battery capacity falls below
10 %
•
Compatible with any battery ranging from 9 to 18V DC
•
Lightweight aluminum anodized enclosure
•
Size : 228 x 120 x 44mm
•
Weight : 700g
http://www.audioroot.fr
audioroot@audioroot.fr
Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation
