background image

Programming Options 

Mode 1

*indicates default setting

Function 1 – Ignition-Controlled Door locks 

OPTION 1*  Ignition Lock disabled

OPTION 2 

Ignition lock enabled 

OPTION 3 

Ignition unlock only 

OPTION 4 

Ignition lock only 

Function 2 – Secure Lock

OPTION 1* 

Secure Lock disabled (1-sec. disarm pulse.)

OPTION 2 

Secure Lock enabled in smart mode.

OPTION 3 

Secure Lock disabled (0.5 Sec disarm pulse)

OPTION 4 

Secure Lock enabled in normal mode.

OPTION 5 

Standard secure lock enabled (no rearm pulse when
ignition is on) 

Function 3 – Door Locks Pulse Timing

OPTION 1* 

7/10 second lock/unlock pulses.

OPTION 2 

4 seconds lock/unlock pulses.

OPTION 3

7/10 seconds lock pulse and two 1/4 second unlock
pulses.

OPTION 4 

1/10 second lock/unlock pulses.

Function 4 – AUX 3 Programming

OPTION 1* 

Constant while the

TRUNK

 button is pressed

OPTION 2

1-sec. Trunk 1 output when 

TRUNK

 button pressed

for 3 sec. while Ignition is OFF and data output.

OPTION 3 

TRUNK

 with disarm/rearm (shock is ignored while 

zone 3 is opened.)

OPTION 4 

TRUNK

 1 sec output ON/OFF

Function 5 – AUX 2 Programming

OPTION 1*

Priority Door access (Pressing

UNLOCK

 a 2nd time

triggers AUX 2)

o

Car Finder enabled (pressing

SHIFT

 and then

LOCK

 triggers Car Finder)

o

The Driver’s Door unlocks upon the 1st
pressing of the 

UNLOCK

 button;

o

All Doors unlock on any subsequent pressing
of the

UNLOCK

 button.

OPTION 2

Toggle ON/OFF with a 30-second timeout (press 

SHIFT

 and then

LOCK

) Car Finder disabled.

OPTION 3

Constant output while pressed (press 

SHIFT

 and then

LOCK

) Car Finder disabled.

OPTION 4

Priority Door access on 2

nd

 Unlock, and Car Finder

enabled.

x

The Driver’s door unlocks upon the 1

st

, 3

rd

, 5

th

 … 

pressing of the

UNLOCK

 button.

x

All Doors unlock upon the 2

nd

 , 4

th

, 6

th

… pressing of

the

UNLOCK

button.

Mode 2

*indicates default setting

Function 1 – N/A

OPTION 1 

N/A

OPTION 2* 

N/A

OPTION 3 

N/A

Function 2 – Safe Start

OPTION 1 

Safe Start enabled 

OPTION 2* 

Safe Start disabled

OPTION 3 

Swap Start – increased safety mode:
To Start: press 

SHIFT

 and then

LOCK

 buttons.

Press the Start button to activate Aux 2.

Function 3 – Engine Run Time

OPTION 1

Run time - 4 minute in Gas mode / 9 minutes Diesel 
mode.

OPTION 2* Run time - 15 minute in Gas mode / 20 minutes Diesel

mode.

OPTION 3

Run time - 25 minute in Gas mode / 30 minutes
Diesel mode.

Function 4 – Idle/Turbo Mode 

OPTION 1 

Idle/Turbo Mode disabled 

OPTION 2*  Turbo Mode enabled

OPTION 3 

Turbo Mode disabled

Function 5 – Engine Type and Cold Weather Mode 

OPTION 1

Diesel Engine Mode and 20-minute run time in Cold 
Weather Mode.

OPTION 2* Gasoline Engine Mode and 4-minute run time in Cold

Weather Mode.

OPTION 3

Diesel Engine Mode and 9-minute run time in Cold
Weather Mode.

Mode 3

*indicates default setting

Function 1 – Siren Chirps

OPTION 1

Warning Chirps only; Lock Confirmation if the Lock
button is press 2nd time.

OPTION 2* 

Chirps enabled.

OPTION 3 

Chirps enabled with Open-Zone notification.
(Siren warning 10 sec. after arming if a door is left
open)
(Also used for vehicles with Dome Light Delay).

OPTION 4

Chirps disabled and Lock confirmation if the Lock
button is press 2nd time.

Function 2 – Passive Or Active Arming

OPTION 1 

Active Arming 

OPTION 2* 

Passive Arming (30 sec.)

OPTION 3

Passive Arming (30 sec.) / no TWO-STAGE
DISARM

OPTION 4

Active Arming with Disarmed Notification.

Function 3 – Ignition Monitoring: Siren Mode / Horn Mode

OPTION 1 

Siren Mode: Ignition Monitoring – disabled.

OPTION 2* 

Siren Mode: Ignition Monitoring – enabled.

OPTION 3 

Horn Mode: Ignition Monitoring – disabled.

OPTION 4 

Horn Mode: Ignition Monitoring – enabled.

Function 4 – Shock Sense / Warn Away

OPTION 1 

Shock Sense - Ignored / Warn Away – ignored

OPTION 2*  Shock Sense - monitored / Warn Away – monitored

OPTION 3 

Shock Sense - Monitored / Warn Away – ignored 

OPTION 4 

Shock Sense - Ignored / Warn Away – monitored

Function 5 – Ignition Valet

OPTION 1 

Ignition Valet - DISABLED

OPTION 2*  Ignition Valet - ENABLED 

OPTION 3 

Ignition Valet – ENABLED

Mode 4

*indicates default setting

Function 1 – MULTI-LEVEL FEATURES

OPTION 1

Multi-car Features, Basic Features, Customized
Features

OPTION 2* Basic Features, Multi-car Features, Customized

Features

OPTION 3

Customized Features, Multi-car Features, Basic
Features

OPTION4

Basic Features, Customized Features,  Multi-car
Features

AS-6320FM

PROGRAMMING OPTIONS AND WIRING DIAGRAM

Reviews: