background image

 

Assemblies Manual MP36 mic preamp.

Hello DIY lovers! 

Thanks for choosing AVDAUDIO
We are proud to introduce you to our new microphone preamp model MP36. 
This preamp was replicated from the vintage API style 528 (or 536) module

Much time has been spent to create input and output transformers which 
possess the same sound and characteristics of the original API transformers. The 
AVD versions of these transformers are faithful reproductions and we think you 
will agree when you hear them

And we are proud we can have did same best sound!

It is our hope that these pres and other DIY projects can help you to do your 
best recordings at all times!

We wish you good luck and please contact us a
any questions. 

Let's start this build!

 

 

 

 

 

 

 

 

 

 

 

 

 

MIC PREAMP MP36

©

2017                  AVDAUDIO.COM

Assemblies Manual MP36 mic preamp.

UDIO. 

We are proud to introduce you to our new microphone preamp model MP36. 
This preamp was replicated from the vintage API style 528 (or 536) module

Much time has been spent to create input and output transformers which 
possess the same sound and characteristics of the original API transformers. The 
AVD versions of these transformers are faithful reproductions and we think you 

them. 

And we are proud we can have did same best sound! 

It is our hope that these pres and other DIY projects can help you to do your 

We wish you good luck and please contact us at info@avdaudio.com

MIC PREAMP MP36 

AVDAUDIO.COM 

Assemblies Manual MP36 mic preamp. 

We are proud to introduce you to our new microphone preamp model MP36. 
This preamp was replicated from the vintage API style 528 (or 536) module. 

Much time has been spent to create input and output transformers which 
possess the same sound and characteristics of the original API transformers. The 
AVD versions of these transformers are faithful reproductions and we think you 

It is our hope that these pres and other DIY projects can help you to do your 

info@avdaudio.com if you have 

Summary of Contents for MP36














Reviews: