background image

AX-ET-6

Electronic Thermostat – Six stage

Product overview

The Axio AX-ET-6 is a six stage electronic thermostat with a two 
line LCD display to simplify setting up. The unit controls 
temperature between -10

°

C to +110

°

C using configurable heating 

and cooling stages. The set point can be adjusted locally using 
push buttons or remotely with a 1-11kΩ potentiometer. A setback 
input is provided for use with an external switch. The minimum 
and maximum temperatures values are stored for display via the 
menu. The AX-ET-6 is provided in a DIN rail carrier and is 
available as 24Vac/dc or 230Vac powered versions.

Features

● Setpoint range -10

°

C to +110

°

C

● Adjustable stage on/off delay time

● Adjustable differential per stage

● 24Vac/dc or 230Vac versions 

● LCD display of temperature, setpoint etc

● DIN rail carrier as standard

● Setback input

● High quality rising clamp terminals

Product specifications

Power Supply

AX-ET-6-24        24Vac 280mA or 24Vdc 110mA ±15% 
AX-ET-6-230      230Vac ±15%

Inputs

Sensor, 10K3A1 ( See Axio temperature sensor range ) 
Remote Setpoint, 1-11kΩ  ( For ± 4

°

C or ±20

°

C )

Setback, volt free timer input (Close contact to activate setback)

LCD Display

2 lines by 8 characters

Temperature Range

-20

°

C to +120

°

C

Stage Selection

CCCCCC, CCCCCH, CCCCHH, CCCHHH, CCHHHH, CHHHHH, HHHHHH
(C=cooling, H=heating)

Setpoint

-10

°

C to +110

°

C

Offset

0 to 50

°

C

Differential

0 to 12

°

C

Setback Range

0 to 30

°

C

On/Off delay Time

1 to 250 seconds

Output Contacts

6 SPNO volt free relays, rated at 10A, 250Vac, resistive load

Terminals

Rising clamp for 0.5-2.5mm

2

 cable

Dimensions & Weight

AX-ET-6-24      103(W) x 82(H) x 48(D) mm / 125 gms
AX-ET-6-230    160(W) x 82(H) x 55(D) mm / 365 gms

Ambient temperature range

0 to 50

°

C

Country of origin

United Kingdom

 

Order codes

Order online at:

 

  www.annicom.com

 

Email orders and enquiries to:

 

  sales@annicom.com

 

AX-ET-6-24

 

AX-ET-6-230

 

Six Stage Electronic Thermostat - 24Vac/dc

 

Six Stage Electronic Thermostat - 230Vac

 

 1 of 4

Issue 1.1 (1/05/12)

Annicom Ltd

Unit 21, Highview, Bordon,Hampshire. GU35 0AX.

Tel: +44(0)1420 487788 Fax: +44(0)1420 487799

Email: sales@annicom.com

www.annicom.com

© Copyright Annicom 2012. All rights reserved.

 1 of 4

Summary of Contents for AX-ET-6

Page 1: ...0 230Vac 15 Inputs Sensor 10K3A1 See Axio temperature sensor range Remote Setpoint 1 11kΩ For 4 C or 20 C Setback volt free timer input Close contact to activate setback LCD Display 2 lines by 8 characters Temperature Range 20 C to 120 C Stage Selection CCCCCC CCCCCH CCCCHH CCCHHH CCHHHH CHHHHH HHHHHH C cooling H heating Setpoint 10 C to 110 C Offset 0 to 50 C Differential 0 to 12 C Setback Range ...

Page 2: ...y switching points to 2 C above the offset and 2 C below the offset MENU I NC DEC INC DEC I NC DEC Stage switching If the stage is set for cooling the relay will switch on when the temperature rises above the upper switching point and will switch off when the temperature falls below the lower switching point If the stage is set for heating the relay will switch on when the temperature falls below ...

Page 3: ...on whilst a dash is shown when the stage relay is off Minimum On and Off times This function prevents over cycling of the output For example setting the minimum on time to 5 seconds will ensure any output stage is in on for a minimum of 5 seconds The Off time works in a similar way When the Actual temperature display is visible press three times to display the On value Press or to adjust the param...

Page 4: ... Once the setpoint and switching requirements have been defined the stage offsets and stage differentials can be calculated For Stage 1 Cooling Stage Offset Stage mid point Setpoint 26 20 6 Stage Differential Switch on Switch off 28 24 4 The calculated values listed below should be entered using the set up menu Setup option Required value Stage select CCHHHH S1 Offset 6 C S1 Differential 4 C S2 Of...

Reviews: