4 9416G932000E
©
Copyright 2014 Axiomtek Co., Ltd.
Version A1 May 2014
Printed in Taiwan
This page is intentionally left blank
.
IPC932-230-FL Quick Installation Guide
9416G932000E 1
©
Copyright 2014 Axiomtek Co., Ltd.
Version A1 May 2014
Printed in Taiwan
Checklist
IPC932-230-FL Series Finless
System Unit x 1
HDD Bracket x 2
Screw Pack x 1
HDD Mylar x 2
Driver CD x1
Foot Pad x 4
Quick manual x 1
Wall mount bracket x 2
CPU Thermal Pad x 1
19V 150W Adapter (for AC
Version)
Remote switch cable x 1
Terminal block x 1 (for DC
version)
Note: Please do not try to apply power to the system if any damaged
components.
Installing the CPU
Step 1
Turn off the system, and disconnect the power connector.
Step 2
Loosen screws to remove the HS cover from the chassis.
Step 3
After opening the Heatsink cover, you can locate the CPU
socket as marked. Align pins of the CPU with pin holes of
the socket. Be careful of the CPU’s orientation that you
need to align the arrow mark on the CPU with the arrow key
on the socket. Please remove the Mylar before you install
the CPU into the socket.
IP
C932-230-FL I
n
dust
ria
l and Fa
nle
ss Com
p
ut
ers
