background image

CAUTION! 

 All accessories, switches, climate 

controls panels, and especially air bag indicator 

lights must be connected before cycling the 

ignition. Also, do not remove the factory radio 

with the key in the on position, or while the 

vehicle is running. 

AXDIS-TY1

I N S TA L L AT I O N I N S T R U C T I O N S

AxxessInterfaces.com 

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION 

REV. 1/23/20 INSTAXDIS-TY1

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape 
• Connectors (example: butt-connectors, bell 
caps, etc.) • Small flat-blade screwdriver

TABLE OF CONTENTS

Connections to be made ....................................2-3
- 3.5mm jack steering wheel control retention ...3
Installing the AXDIS-TY1.........................................3
Programming the AXDIS-TY1 .................................4
Adjusting the AXDIS-TY1 ........................................4
Steering wheel control settings ........................5-7
- L.E.D. feedback ....................................................5
- Changing radio type ...........................................5
- Remapping the steering wheel control buttons ...6

- Dual assignment instructions (long button press)

 ...7

Troubleshooting .....................................................8

Lexus/Toyota

 Amp Interface with SWC

 

2002-2015

APPLICATIONS

•  Provides accessory power 

(12-volt 10-amp)

•  Retains audio controls on the 

steering wheel

•  Provides NAV outputs (parking 

brake, reverse)

•  Retains the factory AUX-IN jack
•  Designed for amplified models
•  Retains balance
•  Micro-B USB updatable

• AXDIS-TY1 interface • AXDIS-TY1 harness
• Female 3.5mm connector with stripped lead

LEXUS

ES Series 

2007-2012

ES Series 
  (w/ multi disc) 2002-2006
IS Series 

2002-2005

RX Series 

2004-2008

TOYOTA

4-Runner 

2003-2013

Avalon 

2011-2012

(Camry) Solara  2004-2008
Camry (w/o nav)  2012-2013
Camry 

2007-2011

Corolla 

2003-2011

FJ Cruiser 

2011-2014

TOYOTA 

(CONT)

Highlander 

2008-2013

Matrix 

2005-2012

Prius 3rd Gen 
  (w/o nav) 

2012-2015

Plug-In (PHV) 
  (w/o nav) 

2012-2015

Prius 

2004-2011

TOYOTA 

(CONT)

Rav-4 

2004-2014.5

Sequoia (w/o nav) 

2013

Sequoia 

2005-2012

Sienna 

2004-2014

Tacoma 

2005-2013

Tundra 

2006-2013

TOYOTA 

(CONT)

Tundra 
  (Double Cab)  2004-2005
Venza (w/ SD card 
  based nav) 

2013-2014

Venza 

2009-2012

Summary of Contents for AXDIS-TY1









Reviews: