AB-5702
1
Specifications/Instructions
Compact Data Gathering Panel
General
Compact Data Gathering Panel (often abbreviated as CDGP)
Model WY7208W is a terminal transmission device for
status/alarm monitoring, ON/OFF operation, and
measurement/metering of equipment installed in commercial
and other buildings.
One CDGP manages a small number of inputs/outputs (two
to eight points), and its compact body fits inside the building
distribution panel/power control panel. CDGP is thus
suitable for a small- and mid-sized building where the points
to monitor are decentralized.
Features
●
Economical:
Price per point is substantially reduced compared to the
price per point of our former remote stations.
●
Compact:
No additional remote panel is required to install CDGP at
remote locations. You can use available space in the
distribution panel or power panel.
●
Simple
wiring:
LAN cable is used for the communication line SC-bus.
Its modular connection facilitates wiring and also
minimizes misconnection.
●
Easy
setting:
Besides addressing with the rotary switch and functional
setting with the DIP switch, no other setting is required
for setup.
Model Numbers
Model number
Description
WY7208W1120
DIO model (Select from the following point configurations using the DIP switch.)
- Start/stop point (maintained contact output) x 2
- Starts/stop, status point (maintained contact output) x 2
- Start/stop, status point (momentary contact output, without unmatched alarm monitoring) x 2
- Start/stop, status point (momentary contact output, with unmatched alarm monitoring) x 2
- Start/stop, status, alarm point (maintained contact output) x 2
- Start/stop, status, alarm point (momentary contact output, without unmatched alarm monitoring) x 2
- Start/stop, status, alarm point (momentary contact output, with unmatched alarm monitoring) x 2
WY7208W2180
DI model (Select from the following functions using the DIP switch.)
- Status, alarm point x 4
- Status point x 8
- Alarm point x 8
- Status point x 4 + alarm point x 4
WY7208W3180
TOT model (totalizer pulse input x 8)
WY7208W4140
AI model (1–5 V DC input or 4–20 mA DC input x 4)
WY7208W5140
RRD model (remote control relay drive output x 4)
WY7208W6140
Pt model (Pt100 input x 4)
Measuring range: -20 °C to 80 °C * This model is connectable to SmartScreen™ / Infilex™ ZM.
