background image

babybrezza.com

Please visit

©2022 Baby Brezza Enterprises LLC

Instructions

PLEASE NOTE:  

All bottles, pump parts & accessories must be empty, clean and rinsed

before use in this sterilizer-dryer

ACTIVATE

YOUR WARRANTY

www.babybrezza.com/register

Benefits:

 Faster customer support,

extended customer service hours & more 

Scan here

Summary of Contents for superfast BRZ0083

Page 1: ...LC Instructions PLEASE NOTE All bottles pump parts accessories must be empty clean and rinsed before use in this sterilizer dryer ACTIVATE YOUR WARRANTY www babybrezza com register Benefits Faster customer support extended customer service hours more Scan here ...

Page 2: ...o ensure a correct sterilizing quality is achieved Use of any attachments not recommended or sold by the manufacturer may cause fire electric shock or injury DO NOT use outdoors Working and storage environment temperature 50 F 95 F 10 C 35 C DO NOT let cord hang over edge of table or counter DO NOT let cord contact any hot surface Ensure nothing is rested on the heating element surface the stainle...

Page 3: ...first use wash Lid Bottle Tray Accessory Tray and Measuring Cup Before placing items in the appliance for sterilization it is important that all bottles pump parts and accessories must be EMPTY CLEAN FULLY RINSED BEFORE USE in this sterilizer dryer Standby mode When the appliance is plugged in all LEDs flash for 0 5 seconds then enters standby mode Cleaning Always unplug the sterilizer dryer befor...

Page 4: ...epresentative Troubleshooting Condition Possible Cause Remedy Appliance will not start Unit is unplugged Insufficient water is in heater plate area Add 120ml 4oz water to heater plate area Let the Sterilizer Dryer cool add 120ml 4oz water to heater plate area and run sterilize dry again Make sure the plug is securely inserted into the power outlet 6 Clean heater plate after each use and use distil...

Reviews: