background image

PRODUCT NAME: Ruben Floor Lamp

ITEM NUMBER: LL325

DIMENSIONS OF ITEM ASSEMBLED: 60”H x 20”DIA

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

Page 1 of 4

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

MADE IN CHINA

IMPORTANT SAFETY INSTRUCTIONS:

-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk 

of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in 

the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an 

extension cord unless plug can be fully inserted. Do not alter the plug.
-These Assembly Instructions are provided for your safety. It is important that they are read carefully 

and completely before assembling this Lamp.
-This product must be installed with the applicable installation code by a person familiar with the 

construction and operation of the product.
-This Lamp has been rated for up to 100 Watt MAX Type A 3-Way Incandescent Bulb (NOT

Included) or 25 Watt CFL 3-Way Bulb (NOT Included).

WARNING:

-Deviation from these Assembly Instructions may result in a risk of fire or electric shock.
-To reduce risk of fire, electrical shock, or personal injury, always turn off and unplug Lamp and 

allow it to cool prior to replacing the bulb.
-Do not touch the bulb when the Lamp is turned on. Do not look directly at the lit bulb.
-Keep flammable material away from the lit bulb.

Summary of Contents for Ruben LL325

Page 1: ...Do not alter the plug These Assembly Instructions are provided for your safety It is important that they are read carefully and completely before assembling this Lamp This product must be installed with the applicable installation code by a person familiar with the construction and operation of the product This Lamp has been rated for up to 100 Watt MAX Type A 3 Way Incandescent Bulb NOT Included ...

Page 2: ...until after assembly and installation is complete to avoid accidentally discarding small parts or hardware Recommended Location for Use Dry Indoor Environment Assembly Time 10 Minutes PARTS Check to make sure you have the following INCLUDED Page 2 of 4 NOT INCLUDED 1 100 Watt Max Type A 3 Way Bulb or 1 25 Watt Max CFL 3 Way Bulb Bottom Column B Base A Top Column C Harp D Finial E ...

Page 3: ... A from the Bottom Column B then screw the Base onto the Bottom Column turning the Base in a clockwise direction until tight STEP 2 Pull the wires through the Bottom Column B from the Top Column C then screw the Top Column onto the Bottom Column turning the Top Column in a clockwise direction until tight Customer Service 800 367 2810 Online www ballarddesigns com A B B C ...

Page 4: ...arp D into the Saddle Lower the Harp Caps until they cover the two pronged Saddle STEP 4 Unscrew the Finial E from the Harp D top Place the Shade not included over the Harp making sure the Harp top extends through the hole at the top of the Shade Screw the Finial onto to Harp top and tighten to secure the Shade Customer Service 800 367 2810 Online www ballarddesigns com Cleaning Care To clean wipe...

Reviews: