DCM36
MF Drivers
LF Drivers
LF Nd Drivers
Coaxials
HF Drivers
Horns
160 W continuous program power capacity
1.4” horn throat diameter
400 – 11000 Hz response
108.5 dB sensitivity
Neodymium magnet assembly
Specifications
Throat Diameter (1)
36 mm (1.4 in)
Nominal Impedance
8 ohm
Minimum Impedance
8 ohm
Nominal Power Handling (2)
80 W
Continuous Power Handling (3)
160 W
Sensitivity (1W/1m) (4)
108.5 dB
Frequency Range
0.4 -11 kHz
Recommended Crossover (5)
400 Hz
Voice Coil Diameter
51 mm (2 in)
Winding Material
Aluminium
Inductance
0.18 mH
Diaphragm Material
Composite
Flux Density
2.1 T
Mounting and Shipping Info
Four M6 holes 90° on 102 mm
(4 in) diameter
Overall Diameter
152 mm (6 in)
Depth
108 mm (4.25 in)
Net Weight
3.1 kg (6.8 lb)
Shipping Weight
3.3 kg (7 lb)
Shipping Box
170x170x140 mm
(6.7x6.7x5.5 in)
1
Driver mounted on 320 Hz exponential horn
2
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
3
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
5
12 dB/oct. or higher slope high-pass filter.
