background image

Please read this manual and save it with your original sales 

Please read this manual and save it with your original sales 

receipt.

receipt.

Tools needed for assembly:  Assembly tool (included) 

Tools needed for assembly:  Assembly tool (included) 

and Phillips Screwdriver (not included). Tool needed to access battery 

and Phillips Screwdriver (not included). Tool needed to access battery 

compartment: Slotted screwdriver (not included)

compartment: Slotted screwdriver (not included)

Use only with a Power Wheels

Use only with a Power Wheels

®

 6 Volt (4.0 Amp/Hr.) Rechargeable 

 6 Volt (4.0 Amp/Hr.) Rechargeable 

Battery with Built-in Thermal Fuse and a Power Wheels

Battery with Built-in Thermal Fuse and a Power Wheels

®

 6 Volt 

 6 Volt 

(4.0 Amp/Hr.) Charger (both included).

(4.0 Amp/Hr.) Charger (both included).

Please read this manual and save it with your original sales 

receipt.

Tools needed for assembly:  Assembly tool (included) 

and Phillips Screwdriver (not included). Tool needed to access battery 

compartment: Slotted screwdriver (not included)

Use only with a Power Wheels

®

 6 Volt (4.0 Amp/Hr.) Rechargeable 

Battery with Built-in Thermal Fuse and a Power Wheels

®

 6 Volt 

(4.0 Amp/Hr.) Charger (both included).

Owner's Manual 

Owner's Manual 

with Assembly Instructions

with Assembly Instructions

For Model K0451

For Model K0451

Owner's Manual 

with Assembly Instructions

For Model K0451

Product features may vary from the picture above.

Product features may vary from the picture above.

Product features may vary from the picture above.

ATV

ATV

Lil’ Trail Rider

Lil’ Trail Rider

Summary of Contents for LIL' TRAIL RIDER





















Reviews: