background image

         WARNING

Read and follow all safety information in this manual, operating instructions and
furnace safety labels.  Failure to follow safety precautions could result in damage,
injury or death.

• Do not store or use gasoline or other flammable vapors and liquids in the
       vicinity of  this or any other appliance.

• WHAT TO DO IF YOU SMELL GAS
    • Do not try to light any appliance.
    • Do not touch any electrical switch; do not use any phone in your building.
    • Immediately call your gas supplier from a neighbor's phone.  Follow the gas
        supplier's instructions.
    • If you cannot reach your gas supplier, call the fire department.
• Installation and service must be performed by a qualified installer or the gas
      supplier.

          WARNING

If the information in this manual is not followed exactly, a fire or explosion may
result causing property damage, personal injury or loss of life

IMPORTANT SAFETY NOTE:  You must know how to turn off gas and electricity to furnace.  Your
qualified installer, service agency or gas supplier can teach you to use controls and switches.

Thank you for reading these safety statements.  Please read on so you will know

how to maintain your furnace for years of dependable service.

         WARNING

Do not use this furnace if any part has been under water.  Immediately call a qualified
service technician to inspect the furnace and to replace any part of the control system
and any gas control which has been underwater.

We're pleased you've chosen our gas furnace to supply your heating needs.  Please keep this manual in a
safe, yet readily available place.  It contains important and useful information.

ATTENTION, INSTALLER:  After installing furnace, give the user:

• User's Information Manual

• Parts List

• Installation Instructions

• Warranty Information

ATTENTION, USER!  Your furnace installer should give you the above four important documents relating
to your furnace.  Keep these as long as you do your furnace.  Pass these documents on to later purchasers or
furnace users.  If any of the four documents are missing or damaged, contact your installer or furnace
manufacturer for replacement.  For efficient service, please give your furnace model and serial number,
from Section 1 or from your furnace rating plate.

USER'S INFORMATION MANUAL

WAG-Series Combination Gas/Electric Wall-Mount

Manual:

2100-279

Supersedes:
File:

Vol I, Tab 20

Date:

04-19-98

BARD MANUFACTURING COMPANY
Bryan, Ohio 43506

Since 1914...Moving ahead, just as planned.

Summary of Contents for WAG-Series














Reviews: