background image

3107C OWNER’S MANUAL                           2/01/23                                  Page 1 of 18 

THE 

                       

      

MODEL 3107C

 

7” WOOD CHIPPER OWNER’S MANUAL 

 
 

 
CONGRATULATIONS! 
 
You are now the proud owner of the BARRETO 3107 Chipper. The OPERATOR’S MANUAL is 
attached to the machine. Please study it and this manual to become familiar with the 3107C, its 
characteristics, and method of operation. Pay particular attention to the safety and operating instructions 
to prevent personal injury or equipment damage.   
 
If you have any questions or need any replacement parts in the future, please contact us at your 
convenience. Our toll-free phone number, fax and email are listed below. 
 
THANK YOU for your patronage and confidence in BARRETO equipment. 
 
Barreto Manufacturing, Inc. 
Innovative Equipment Engineered to Last 
66498 Hwy 203, La Grande, OR  97850 
(800) 525-7348    (541) 963-7348 
FAX (541) 963-6755 
E-Mail: 

info@barretomfg.com

 

Web Site

http://www.barretomfg.com

 

 
 
 
 

Machine Identification Record 

 

Machine model number  

________________________ 

 
Machine serial number   

________________________ 

 
Engine manufacturer      

________________________ 

 
Engine model number    

________________________ 

 
Engine serial number     

________________________ 

Summary of Contents for 3107C



















Reviews: