Getting Started with your BASI Systems™ Arm Chair Classic Set
Welcome to the BASI Systems™ Arm Chair Classic Set! In one box you will find the BASI Systems™ Classic Arm Chair
and the F2 System™. There is a BASI Systems™ tote bag that holds the smaller pieces: a pair of aluminum handles with
non-metal attachments and two long yellow springs. In a smaller box there are twelve carabiners, a cleaning cloth and
a BASI Systems™ key chain.
In a second box, there is the ladder with metal attachment sleeves already attached, frame and standing platform. There
are also two knobs, four screws and a wrench.
The third box contains the Arm Chair Box, its own F2 System™, a pair of neoprene loops with non-metal attachments
and two yellow springs.
Pilates Precision and Flow™
BASI Systems™ equipment delivers a breakthrough in precision and flow for Pilates
movement. The intelligent design of BASI Systems™ brings together over thirty years of
Pilates practice and research with the highest quality custom materials and craftsmanship.
BASI Systems™ Arm Chair Classic Set brings leading-edge
functionality to barrel work! With its innovative F2 System™
springs can be attached at a multitude of angles and resistance
levels for expansive and innovative repertoire. The orthopedic
padded cushion is a flat top design for comfort and support. Use
it with the ladder and chair box for additional
F2 System™ options!
BASI Systems™ Arm Chair Classic Set
“I see the equipment as an extension
of myself when I practice and teach,
and therefore I want it to inspire my
work, my movement and my spirit.”
Rael Isacowitz, Founder BASI Pilates
®
Dimensions
ARM CHAIR CLASSIC - width 23”/ 58.5cm x length 40”/ 101.5cm x height 37”/ 94.5cm
LADDER
- width 36”/ 91.5cm x length 42”/ 106.5cm x height 37”/ 95cm
ARM CHAIR BOX
- width 18”/ 46cm x length 31”/ 80cm x height 14”/ 37cm
Install Ladder
Two metal sleeves are already attached to the ladder frame. Press the metal attachment
sleeves of the ladder onto the frame base. Secure the ladder to the base by holding the bolts
in place and tightening the screws with the enclosed wrench. Check all screws and bolts
and make sure that they are tightly fastened.
Position Ladder
Place the knobs into the holes on either side of the ladder frame. Position the ladder where
desired along the track of the frame and tighten the knobs to secure.
Place Standing Platform
Set the platform at the base of the ladder. It can stand up and out of the way when not
in use.
