1.
: press to turn the light on/off and adjust the
brightness
2.
DC PORT
: plug in the supplied adaptor to the
DC port and the other end to a power socket
with a power source to power on the unit
3.
LCD DISPLAY SCREEN
4.
Clock Backup Battery
: use a screwdriver to
remove the screw and insert a CR2032 battery
(not included).
5.
5W WIRELESS CHARGER LED INDICATOR
6.
5W WIRELESS CHARGING PAD
7.
10W WIRELESS CHARGING LED INDICATOR
8.
10W WIRELESS CHARGING PAD
Have you got everything?
Operation
Product Overview
User Guide
Model: ACDC-0522-W, ACDC-0522-M
Dual Wireless Charging Clock
Unpack the box (be gentle) and make sure all of these items are there:
A. Dual Wireless Charging Clock
B. Power Adaptor
Connect the supplied power adaptor to the DC port on the unit and the other end to a wall plug. The
LCD display screen will light up and a beep sound will be heard.
To set the time, press the
button. The hour on the LCD display screen will flash. Use the
/
buttons to set the hour. Press the
button again and the minutes on the LCD display screen will flash.
Use the
/
buttons to set the minutes. Press the button again to store the time setting (the
time setting will automatically exit after 30 seconds of no operation). Once the time is set, press the
button to switch between 12 hour/24 hour display mode.
To set the 1st alarm, press the button to enter alarm mode. Press the button and the hour on the
LCD display screen will flash. Use the
/
buttons to set the hour. Press the button again and the
minutes on the LCD display screen will flash. Use the
/
buttons to set the minutes. Press the
button again to set the snooze timer (5/10/15/20/25/30 minutes). Press the button to store the alarm
setting (the alarm setting will automatically exit after 30 seconds of no operation).
To set the 2nd alarm, repeat the above steps.
To turn both alarms on/off, press and hold the SNOOZE button. It will turn on/off the 1st alarm, 2nd
alarm and both alarms.
When an alarm rings, press the SNOOZE button to enter snooze mode. Press the SNOOZE button
again to cancel snooze. When an alarm rings, press the / /
/
buttons turn off the alarm. The
alarm will automatically stop ringing after 1 minute of no operation.
Press the SNOOZE button to adjust the brightness of the LCD display screen (high/medium/low/off).
Press the button to adjust the light brightness (low/medium/high/off).
To use the dual wireless chargers, place your smart phone facing up on the 5W/10W wireless charging
pads. The 5W/10W wireless charging LED indicator will light up red when charging. If the smart phone
doesn’t start charging, adjust the position and/or remove your smart phone case. Also ensure that there
are is no metal or other objects between the smart phone and the wireless charging pad.
Notes:
The wireless charging function works only on wireless charging compatible smart phones.
Note: this unit uses a button or coin cell battery as backup (not included) as a backup system. Using a
screwdriver, remove the battery compartment cover on the underside of the unit and insert the battery,
ensuring the positive (+) is facing up.
When replacing the battery, do not disconnect the power adaptor otherwise the clock/alarm settings
will be lost.
C. User Guide
D. Warranty Certificate
Your new product is ready to enjoy!
Well done, you made it.
Now sit back and relax... your new product is automatically covered
by a 1-year warranty. How nice!
9.
CL
: press to enter clock and alarm settings
10.
AL
: press to display the alarms
11.
SNOOZE
: press to enter snooze mode.
In Clock mode, press to adjust the LCD
display brightness. Press and hold to turn
alarms on/off
12.
: in Clock setting mode, press to set the
time and alarm. When alarm is ringing, press
to turn off the alarm
13.
: in Clock setting mode, press to set the
time, alarm, change between 12 / 24 hour
display mode. When alarm is ringing, press
to turn off the alarm
C
D
Top base
Bottom base
3
4
1
6
5
8
9
10
12
13
11
7
2
