NO
PART LIST
QTY
BACK REST
1PC
SIDE PANEL
(L)
FRONT
SIDE RAIL
LEG
ITEM
HARDWARE
QTY
JCBB SCREW
M8 x 20MM
L - KEY
M5 x 65MM
1PC
1PC
4PCS
2PCS
14PCS
STEP 1
STEP 2
1
2
3
4
5
F
G
ABBIE DAYBED-F / ABBIE DAYBED-Q
6
SIDE PANEL
(R)
Please do not tighten the hardware until the entire assembly is completed.
7
8
SLAT
2 SET
SPRING WASHER
FLAT WASHER
L - KEY
M4 x 65MM
SCREW
M4 x 32MM
12PCS
1PC
1PC
E
9
A
7pcs
B
SLAT
SUPPORT
SUPPORT
LEG
BACK
SIDE RAIL
1PC
1PC
1PC
D
JCBC SCREW
M6 x 50MM
C
8PCS
4PCS
4PCS
Begin assembly by attaching each Leg (6) to the
bottom of the Side Panel (2) & (3) securing with
2 Allen Bolt (B) per panel using L-key (F).
Then attach the Back Side Rail (5) to the Side Panel
(2) & (3) by aligning holes and securing with 2
Allen Bolts (A) per each side using L-key (G).
And attach the Front Side Rail (4) also by aligning
holes and securing with 4 Allen Bolts (A) per
side using L-key (G).
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Attach the Back Rest (1) to the back of each Side Panel (2) & (3) by aligning
the hole and securing with 2 Allen Bolts (B), 2 Spring Washer (C),
2 Flat Washer (D) from the back side per each end
using L-key (F).
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
A
G
STEP 1.2
6
B
F
STEP 1.1
2
4
3
5
4
2
3
5
1
F
B
D
C
1
