Advanced mPOS Design Integrating
Bluetooth
®
Magstripe, EMV and NFC Card Reading Functions
Chipper 2X
TM
BT
www.bbpos.com
Support Operating System:
iOS, Android, Windows Phone 8, MS Windows
Package Contents
Device
X1
USB cable
X1
Lanyard
X1
Quick Start Guide
X1
Application Download & Installation
This device can support either iOS & Android.
1. Please download the official application from app stores before operation .
2. Please follow app instructions to register and login for proper operation.
3. For any questions, please contact the official application developer.
STEP 3
Select Chipper™ 2X BT in the Scanned Device List
on your
smartphone/tablet. Then, your Chipper™ 2X BT is
connected and green LED will ON.
Reset button
(**please use paper
clip for reset)
Micro USB Port for
Charging
Index & Accessories (Fig.1)
Power button
For EMV Card Reading
For Magstripe
Card Reading
LED Indicator
Lanyard holder
For NFC card
reading
NFC status indicators
Quick Start Procedures
STEP 1
Connect Micro USB charging cable to charge the device as
shown to the right.
Download the official application from APP Store or Google
Play Store.
** Chipper™ 2X BT is powered by an internal Lithium Polymer rechargeable
battery pack that cannot be removed or replaced. Before first use, charging is
required for approximately two to three hours. To prevent potential electrical
damage to the Chipper™ 2X BT , please be recommended to use the Micro
USB cable provided with the packaging only.**
within 4 cm
STEP 4:
You can follow your application
instruction to start the transaction process, then
swipe, insert or tap card to complete the transaction.
** If you pay via swiping card or inserting EMV IC card, please ensure that the magstripe or EMV chip of the
card is facing the right direction. If you pay using NFC card, please ensure you tap the NFC payment card
within 4cm range on top of the NFC marking.
NFC Status indicators
Ready for tapping card
First LED ON
Reading card information
LEDs ON in consecutive order
Card reading process
successfully completed
4 LEDs ON + “BEEP”
Transaction completed
“BEEP”
Standby mode
First LED flashing
Error, please retry
2 “BEEP”s
APP
DOWNLOAD
STEP 2
Turn on the device pairing function of your
smartphone/tablet. Then, press “ ” to turn on the
Chipper™ 2X BT.
** Please ensure that
Bluetooth
®
function of your
smartphone/tablet is ON before device pairing.
Bluetooth
ON
Scanned
Device List
Quick Start Procedures
