SMPTE Hybrid Fiber Cable Tester
User Guide
Features & Benefits
Most Comprehensive Tester for Hybrid
Fiber Camera Cables
Tests Both Electrical and Optical Circuits
Intuitive Diagnostic Display Graphically
Depicts Which Contact is Defective or
Pinned Out Incorrectly
Compatible with All SMPTE 304 Standard
Connectors
Compact, Hand-Held Design
Rechargeable Battery for 40 Hours of
Operation
OLED Backlit Display Easily Seen in
Direct Sunlight or at Night
Ruggedized ABS Plastic Carrying Case
Applications
HD Trucks
Sports/Events Broadcasting
Fixed or Mobile Facilities
View the Demo at
gepco.com/SMPTEtester
GEPCO
is a
trademarks of
Belden Inc.
©2016
,
Belden Inc.
Form No. GEP-0064-0116
[LABEL HERE]
Telephone: 800.966.0069
847.795.9555
E-mail: gepco@gepco.com
www.gepco.com
Meter Unit
Plug End
Charging End
OK Key
Initializes cable test.
Press
ESC Key
to wake up
meter. Hold for
8
seconds
and
release
to power meter
off.
UP/DOWN Arrow
Toggles between absolute
optical power in dBm and
relative optical power in dB.
TFT OLED Display
Displays meter
mode options and
text mode options.
These screens are
detailed on page 2.
When cable test
has completed, a
diagnostic image
will appear here.
LEFT/RIGHT
Arrow
Scrolls through
multiple
diagnostic
screens when
multiple errors
have occurred.
Charging Indicator
USB Mini
Charging
Port
Plug
SMPTE Hybrid Fiber Cable Tester
Socket End
Charging End
Light Source Unit
Laser Mode Indicator
Laser Mode Select
Powers the Light Source (LS) on, then
selects between the three laser modes
on the LS Device.
*Press once:
Enables both lasers.
Laser Mode Indicator is solid green.
*Press twice:
Channel 1 - Laser on
Channel 2 - Laser flashes on and off
Laser Mode Indicator is flashing
green.
*Press three times:
Turns off lasers.
Laser Mode Indicator is off.
USB Mini
Charging
Port
Charging Indicator
Socket
Face
SMPTE Tester Manual 2016_0108.indd 1
1/15/2016 2:30:56 PM
