background image

    

Medical device information

Read this first

Thank you for choosing a product from Bellman & Symfon – the 
world leader in listening systems based in Gothenburg, Sweden. 
This leaflet contains important medical device information. Please read 
it carefully to make sure that you understand and get the best out of 
your Bellman & Symfon product. For more information about features 
and benefits, contact your hearing care professional.

About the BE9122 Headphones

Intended purpose

The intended purpose of this device is to connect it to a listening device 
that amplifies the volume and improves the speech intelligibility.

Intended user group

The intended user group consists of people of all ages with mild to 
severe hearing loss that need audio amplification.

Intended user

The intended user is a person with mild to severe hearing loss.

Principle of operation

Connect the headphones to the listening device, put them on, 
and adjust the volume on the device.

 

This device will not restore normal hearing and will not 
prevent or improve a hearing impairment or deafness 
resulting from organic conditions.

Important safety information

This section contains important information about safety, handling 
and operating conditions. Keep this leaflet for future use. If you are just 
installing the device, this leaflet must be given to the householder. 

Hazard warnings

  Failure to follow these safety instructions could result in fire, 

electric shock, or other injury or damage to the device or 
other property.

 Keep this device out of reach of children under 3 years. 
  Do not use or store this device near any heat sources such as 

naked flames, radiators, ovens or other devices that produce 
heat.

  Do not dismantle the device; there is a risk of electric shock. 

Tampering with or dismantling the device will void warranty.

  This device is designed for indoor use only. Do not expose the 

device to moisture.

  Protect the device from shocks during storage and transport.
  Protect cables from any potential source of damage.
  Do not make any changes or modifications to this device. 

Use only original Bellman & Symfon accessories to avoid any 
electrical shock.

  The connected listening device has a very powerful amplifier 

and the sound level can cause discomfort or, in serious 
cases, endanger hearing if the product is used carelessly. 
Always turn the volume down to a low level before putting 
on the headphones!

Information on product safety

 

Failure to follow these instructions could result in damage 
to the device and void the warranty. 

 

Do not use the device in areas where electronic equipment 
is prohibited. 

 

The device may only be repaired by an authorized 
service center.

 

If you encounter other problems with your device, contact the 
point of purchase, your local Bellman & Symfon office or the 
manufacturer. Visit bellman.com for contact info.

 

Do not drop your device. Dropping onto a hard surface can 
damage it.

 

If a serious incident occurs in relation to this device, contact 
the manufacturer and relevant authority.

Operating conditions

Operate the device in a dry environment within the temperature 
and humidity limits stated in this leaflet. If the device gets wet or is 
exposed to moisture, it should no longer be regarded as reliable and 
should therefore be replaced.

Cleaning

Disconnect all cables before you clean your device. Use a soft, lint-free 
cloth. Avoid getting moisture in openings. Do not use household 
cleaners, aerosol sprays, solvents, alcohol, ammonia or abrasives. 
This device does not require sterilization.

Service and support

If the device appears to be damaged or doesn’t function properly, 
follow the instructions in the user guide and this leaflet. If the product 
still doesn’t function as intended, contact your local hearing care 
professional for information on service and warranty.

Warranty conditions

Bellman & Symfon guarantees this product for six (6) months from 
date of purchase against any defects that are due to faulty materials 
or workmanship. This guarantee only applies to normal conditions 
of use and service, and does not include damage resulting from 
accident, neglect, misuse, unauthorized dismantling, or contamination 
howsoever caused. This guarantee excludes incidental and 
consequential damage. Furthermore, the warranty does not cover 
Acts of God, such as fire, flood, hurricanes and tornadoes. 
This warranty gives you specific legal rights and you may also have 
other rights that vary with territory. Some countries or jurisdictions 
do not allow the limitation or exclusion of incidental or consequential 
damages, or limitations on how long an implied warranty lasts, so the 
above limitation may not apply to you. This guarantee is in addition to 
your statutory rights as a consumer. The above warranty may not be 
altered except in writing signed by both parties hereto.

With this symbol, Bellman & Symfon confirms that 
the product meets the Medical Device Regulation 
EU 2017/745.

This symbol indicates the manufacturer’s serial number 
so that a specific medical device can be identified. 
It’s available on the product and gift box.

This symbol indicates the manufacturer’s catalogue 
number so that the medical device can be identified. 
It’s available on the product and gift box.

This symbol indicates the medical device manufacturer, 
as defined in EU Directives 90/385/EEC, 93/42/EEC and 
98/79/EC.

This symbol indicates that the user should consult

 

this leaflet.

This symbol indicates that it is important for the user to pay 
attention to the relevant warning notices in the user guides.

This symbol indicates important information for 
handling and product safety.

Temperature during transport and storage: 
–10° to 50° C, 14° – 122° F. Temperature during 
operation: 0° to 35° C, 32° to 95° F

Humidity during transportation and storage: 
<90%, non-condensing. Humidity during operation:  
15% – 90%, non-condensing

Atmospheric pressure during operation,  
transportation and storage: 700hpa - 1060hpa

Operating 

conditions

This device is designed such that it functions without 
problems or restrictions if used as intended, unless 
otherwise noted in this leaflet. 

With this CE symbol, Bellman & Symfon confirms 
that the product meets EU standards for health, 
safety, and environmental protection as well as the 
Radio Equipment Directive 2014/53/EU. 

This symbol indicates that the product shall not be 
treated as household waste. Please hand over your old 
or unused product to the applicable collection point for 
the recycling of electrical and electronic equipment or 
bring your old product to your hearing care professional 
for appropriate disposal. By ensuring this product is 
disposed of correctly, you will help prevent potential 
negative effects on the environment and human health.

Regulatory symbols

Technical specifications

Weight: 

57 g, 2 oz

Frequency range: 

20 Hz – 20 kHz

Impedance:

 

32 Ω +/- 10%

Sensitivity: 

109 dB/mW @ 1 kHz

Colour:

 

Black

Cable length: 

1.25 meters

Connector: 

3.5 mm stereo plug

In the box

 

BE9122 Headphones

Configuration options

These headphones can be configured with all of Bellman & Symfon’s 
personal amplifiers and listening systems.

 

For detailed product information, see the corresponding 
user manual.

Compliance information

Hereby Bellman & Symfon declares that, in Europe, this product is in 
compliance with the essential requirements of the Medical Device 
Regulation EU 2017/745 as well as the directives and regulations listed 
below. The full text of the declaration of conformity can be obtained 
from Bellman & Symfon or your local Bellman & Symfon representative. 
Visit 

bellman.com

 for contact information.

Medical Device Regulation (MDR)

EC General Product Safety Directive

Electromagnetic Compatibility Directive (EMC)

Restriction of Hazardous Substances Directive (RoHS)

REACH Regulation

Waste Electrical & Electronic Equipment (WEEE)

ISO Certification of legal manufacturer

Bellman is certified in accordance with SS-EN ISO 9001 and 
SS-EN ISO 13485.
SS-EN ISO 9001 Certification Number: CN19/42071 
SS-EN ISO 13485 Certification Number: CN19/42070

Certification Body

SGS United Kingdom Ltd 
Rossmore Business Park Ellesmere Port Cheshire CH65 3EN UK

BE9122 Headphones

EN

  Medical device information

DE

  Informationen zu Medizinprodukten

FI

 

Lääketieteellisiä laitteita koskevat tiedot

NL

  Informatie over medische hulpmiddelen

NO

  Informasjon om medisinsk utstyr

SE

 

Information om medicinteknisk utrustning

EN

Reviews: