Besstec (Zhongshan) Electronics Co., Ltd
BESSTEC-S01
Instruction
Battery charging: Headset must be fully charged before using it for the first time.
1.
Connect the charger with the charging plug of the headset.
2.
Insert the charger plug into the power plug.
3.
The indicator light shows red when charging, green when fully charged.
4.
After fullly charged, take the charger away from the power plug and the charging plug of the headset .
Starting up, power off,searching
1.
Starting up: Press the main button for about 3 seconds until the headphone prompts "start up",the indicator light flashes blue, .
2.
Power off: Press the main button for about 3 seconds until the headphone warning "power off", the indicator light flashes red
3.
Searching:The indicator light flashes red and blue by turns automatically; If not, press the headset's main button until the indicator light
flashing rea and blue by turns, headphone warning "Matching succeeded"
Match the headset with the phone
1.
Star up the headset, it will beginto search automatically.
2.
Turn on the Bluetooth of the cellphone, it will start to search the signal of the headset automatically.
3.
When the phone finds the signal of the headset, the name of the headset will be displayed in the search list. Please confirm the headset to make
them match.
4.
Match the phone and the headset according to the instruction of the phone. If the password is needed, please enter the password.
5.
If the match fails, repeat the steps above.Once matched,the headset will connected to the phone automaticlly.
6.
If the match succeeds, the indicator light will flash blue. Once succeed, all of the sound of the phone will be transfered to the headset. Then
you can turn on the music player and make a phone call as well as answer the phone.
.
Match two phones at the same time
1.
Start up the headset, it will begin to search automatically.
2.
Turn on the Bluetooth of the 1st phone, it will start to search the signal of the headset automatically. Turn off the headset when the match
succeeds.
3.
Start up the headset, it will begin to search automatically.
4.
Turn on the Bluetooth of the 2nd phone, it will start to search the signal of the headset automatically. Turn off the headset when the match
succeeds.
5.
Start up the headset (Notice: do not enter the search state) The headset will match these two phones automatically
6.
If the headset matches only one phone automatically, Please match the other phone manually.
Answer the call
