Designed to assist with toilet
transfers, this adjustable toilet
seat raiser attaches to existing
toilet seat mounting points.
Can be used with or without
armrests (one or both).
Seat height can be adjusted to
80 mm, 120 mm or 160 mm.
Position the unit onto your
toilet bowl, inserting the rear
mounting bolts through the
existing holes on your toilet.
Ensure the unit is centred over
the toilet bowl.
Adjustable Toilet Seat Raiser
Set-up and Operation
Prior to use please read all
instructions
Unit must be correctly mounted to
an existing toilet bowl before use
Installation
Remove the existing toilet
seat from the bowl. Seats
are generally attached by
a pair of bolts/nuts located
under the rear rim of the
toilet.
Unscrew and remove the
long plastic nuts from the
rear of the toilet seat raiser.
Check the toilet seat raiser
is firmly clamped against
the toilet bowl before use.
The position of the mounting bolts can be adjusted to suit
different toilets. To adjust, slide the mounting bolts along the rear
bar to achieve the correct
distance.
Mounting nuts must be
loose for mounting bolts to
slide freely along the bar.
Reattach both long plastic
nuts to the mounting bolts
and tighten firmly.
Nut
Bolt
Rear bar
1