background image

THREE SEATER CUSHONED SWING

ASSEMBLY INSTRUCTIONS

ITEM# SW-RK938

SKU# 810502907

DO NOT RETURN THIS PRODUCT TO THE STORE. FOR MISSING PARTS OR QUESTIONS TO THIS PRODUCT PLEASE CALL US AT 1-888-733-8169 

OR EMAIL US AT   customerservice _01@yeah.net OR customerservice _02@yeah.net OR customerservice _03@yeah.net

IMPORTANT: 

                                                                                                                                                                                                                                                 

Please read all the instructions and warnings before assembling. In order to make the whole product adjust to the best, please install all the screws on the product 

before fully tighten, and note to put the washer to the screw before putting the screw into the screw hole.

WARNING:

Use the correct screws as indicated. All screws should be hand tighten until the complete piece is assembled ( This will make the 

assembly process much easier ). Once the piece is fully assembled, then go back and tighten all screws with provided tool.

Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product construction.

Keep assembly area at leat 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or electrical wires.

Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal 

injury and damage to the product. Please read all instructions before assembly and use.

The swing is for sitting purpose only, is not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only.

The swing is not a toy. This three seater swing tested for use at weight of 660 lb (300kg). Improper use of this product or failure to use as 

directed may result in injury. Not intended for commercial use.

CARE & MAINTENANCE  

STAIN RESISTANT  CUSHIONS CARE —— KEEP THE CUSHIONS IN STORAGE IN RAINING DAYS.     

SPILLS:

 Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone. Allow cushion to air dry.  

FABRIC CARE: 

Hand wash cold, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry clean.

Summary of Contents for SW-RK938

Page 1: ...when they are in the area of the product construction Keep assembly area at leat 6 feet from any obstruction such as a fence garage house overhanging branches laundry line or electrical wires Some parts may contain sharp edges When assembling and using this product basic safety precautions should always be followed to reduce the risk of personal injury and damage to the product Please read all ins...

Page 2: ...X38MM Unit 4 F Long Hanging Pole 2 P Screw M6X35MM Unit 4PC 4 G Seat and Back Panel 1 R Screw M6X62MM Unit 2 H Support Connecter 2 S Screw M6X58MM Unit 2 I Fabric Cover 1 X1 Wrench 1 J Ajustable Handle 2 X2 Allen Wrench 1 K Spring 2 Warranty One year limited warrantly Proof of purchase dated register receipt is required for warranty claims It remains the customer s responsibility for freight and p...

Page 3: ... X2 3 Secure 2 Support Connecter H to Leg Tube A with 4 Screw Unit P by using Wrench X1 and Allen Wrench X2 STEP 3 1 Secure Seat and Back Panel G to 2 Armrest D and 2 Short Hanging Pole E with 2 Screw Unit R by using Wrench X1 and Allen Wrench X2 2 Secure Armrest D and 2 Short Hanging Pole E with 2 Screw Unit O by using Wrench X1 and Allen Wrench X2 3 Secure Seat and Back Panel G to 2 Armrest D wi...

Page 4: ...mbled swing to connect the Top Hanging Pole C by Spring K Verify the alignment and adjust fully tighten all screws Secure Fabric Cover I to Top Hanging Pole C with 2 Ajustable Handle J by hand STEP 6 Put cushions on assembled swing ...

Reviews: