background image

TA970 Setup Manual 

 

 

FCC Information and Copyright 

 

This equipment has been tested and found to comply with the limits of a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. There is no guarantee that interference will not occur in a particular 
installation. 

 

The vendor makes no representations or warranties with respect to the contents here and 
specially disclaims any implied warranties of merchantability or fitness for any purpose. 
Further the vendor reserves the right to revise this publication and to make changes to 
the contents here without obligation to notify any party beforehand. 

Duplication of this publication, in part or in whole, is not allowed without first obtaining the 
vendor’s approval in writing. 

 

The content of this user’s manual is subject to be changed without notice and we will not 
be responsible for any mistakes found in this user’s manual. All the brand and product 
names are trademarks of their respective companies. 

 
 

 

 

   
 

 
 
 
 

 
Dichiarazione di conformità 
sintetica 

Ai sensi dell’art. 2 comma 3 del D.M. 
275 del 30/10/2002 
Si dichiara che questo prodotto è 
conforme alle normative vigenti e 
soddisfa i requisiti essenziali richiesti 
dalle direttive 
2004/108/CE, 2006/95/CE e 
1999/05/CE 
quando ad esso applicabili 

 
Short Declaration of conformity   

We declare this product is complying 
with the laws in force and meeting all 
the essential requirements as specified 
by the directives 
2004/108/CE, 2006/95/CE and 
1999/05/CE 
whenever these laws may be applied

 

 

 

 

Summary of Contents for TA970




















































Reviews: