background image

Date:  04/01/2015       Rev:   4              B.A.                    N.J.C.                       File:    980inst.pub;  980assm.dwg       Ref#: 950259 

—— Instruction Manual —— 

BA980F/RS/RT

 

Height Adjustment System 

Customer Service     

(402) 474 3353 

Item 

Qty 

Description 

Item 

Qty 

Description 

Height Adjuster Frame 

3/8” Hex Nut 

Height Adjuster Hand Crank 

16 

3/8” Flat Washer 

Height Adjust Label 

3/8” Lock Washer 

3/8” X 3” Hex Bolt 

 

 

 

P A R T S   L I S T 

 

  Warning!!!  

Wall structure must safely support additional weight of height adjuster. 

980F = 90# , 980RS = 140# , 980RT = 160# 



Inspect all contents prior to installation.  Report any missing parts to dealer immediately. 

 



Read all instructions before proceeding. 

3/8” X 3” Hex Bolt 

3/8” Flat Washer 

3/8” Hex Nut 

3/8” Lock Washer 

1

. Mount 

Height Adjuster Frame

 (A) to wall structure 

 with

 3/8” X 3” Hex Bolts

 (D),

 3/8” Hex Nuts

 (E), 

 

3/8” Flat Washer 

(F) and 

3/8” Lock Washer 

(G).  

 See 

Figure 

A. 

 
2. Level 

Height Adjuster Frame

 (A) to playing surface/

 

wall structure. Tighten all hardware. 

 
3.  Mount backboard assembly to the 

Height Adjuster 

 Frame

 (A) using mounting brackets shown. Hardware 

 

included in backboard packaging or existing in 

 

previously installed product. See Figure A. 

 
4.  Mount rim to backboard. Hardware included in rim 
 

packaging or existing in previously installed product. 

 
5.  Level backboard and rim to playing surface. Tighten 
 all 

hardware. 

Note

Never tighten the hardware in the lead screw nut 

block. See Figure B on page 2. 

Figure A 

Reviews: