DATASHEET / USER MANUAL
Walk Clock USER MANUAL
LED Walk/Don’t Walk Clock
•
Three LED Brightness Settings (Low, Standard, High)
•
24Hr and 12Hr Clock Modes (12Hr is Standard)
•
Power Backup Circuit 7 days (Keeps correct time without AC power
for up to 7 days)
The LED Walk/Don’t Walk Clock is a 12/24Hr Clock which uses the
same size and specification indicators as a street crossing
indicator. The clock uses the ‘Walk Time Remaining’ count-down
timer to display the hours and minutes of the clock (Hours and
Minutes alternate every two seconds). The Walking Man and Hand
indicator is used in lieu of the second hand on the clock. The
seconds can be broken down by: Walking Man - 0-20 seconds of the
minute, flashing Hand 21-40 seconds, and solid Hand 41-59
seconds of the minute. The clock also features an auxiliary
power circuit to keep accurate time when the clock is
disconnected from AC power, this allows for the clock to be
plugged into a switched outlet and not have to be set on power
up. This auxiliary power circuit never needs a battery and keeps
time for 7-10 days.
Package Contents:
1 x LED Walk/Don’t Walk Clock
1 x 120VAC US Power Adapter 1.5m
Length
Copyright 2018 - BitGen Technologies LLC
