BJLive BJOY Ring Wireless Getting Started Download

Page: 1 / 4

Getting started with the BJOY Ring wireless

Charge the battery

using the

micro USB cable provided until
the battery LED (red) stops
flashing. Disconnect the cable.

Assembly all the parts

of the

equipment

following the

instructions of the Quick Start
Guide.

Connect the receiver

to the USB

port of the device that you wish
to control.

(It is possible to connect

up to 4 receivers)

If using the device for first time

press the reset button

in the

transmitter to activate it.

Do not

move the joystick while the
device is beeping.

Calibrate the device using the
BJOY software.

Install the

program in a Windows PC and
follow the instructions of the
calibration menu to perform the
calibration.

Customise the device operation

using the BJOY software. Check
the Help menu for instructions.

Step

Summary of Contents for BJOY Ring Wireless

Page 1: ...at you wish to control It is possible to connect up to 4 receivers If using the device for first time press the reset button in the transmitter to activate it Do not move the joystick while the device...

Page 2: ...press the switch W N S E W Enabling the option to shut down with a switch press in the shutdown menu of the configuration program Choose Switch A or B and set the Shut down accept time Using the butto...

Page 3: ...at you wish to control It is possible to connect up to 4 receivers If using the device for first time press the reset button in the transmitter to activate it Do not move the joystick while the device...

Page 4: ...press the switch W N S E W Enabling the option to shut down with a switch press in the shutdown menu of the configuration program Choose Switch A or B and set the Shut down accept time Using the butto...