![background image](http://html1.mh-extra.com/html/black-box/flexpoint-lmc200a-2ps-dc/flexpoint-lmc200a-2ps-dc_user-manual_2760923001.webp)
Omnitron Systems Technology, Inc.
FlexPoint
TM
Powered Chassis
48V Power Redundant
14 Module Chassis
User’s Manual
Hot Attachment of Power Supplies:
1. Unpack the power supply carefully. Inspect for any damages. If any damage is
observed, do not use the power supply and call (949) 250-6510 to report the
damage immediately and request a replacement unit.
2. Attach the power supply to the chassis and reconnect the 48VDC power source
to the FlexPoint power supply.
3. Locate the 48VDC circuit breaker and switch the circuit breaker to the ON
position.
4. Turn the FlexPoint Chassis power supply ON.
5. Observe the LED in the front of the chassis indicating that the power has been
restored.
SPECIFICATION
Indicators:
Power ON:
LED (2), Yellow, power applied
Dimensions / Weight: W:19.0"xD:7.0"xH:3.5" / 9 lb.
Power:
48VDC / 3.0 Amps (for model 4386)
2ea. 48VDC / 3.0 Amps (for model 4385)
Environmental:
Temperature:
0 to 40 degrees C
Humidity:
0-90% (non-condensing)
JULY 2001
LMC200A-2PS-DC
LMC200A-DC
PSFP20-DC
CUSTOMER
SUPPORT
INFORMATION
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week; Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com
z
E-mail: info@blackbox.com
©Copyright 1999-2001. Black Box Corporation. All rights reserved.
1000 Park Drive
z
Lawrence, PA 15055-1018
z
724-746-5500
z
Fax 724-746-0746