1
8
© DLC, Inc.
65-FM250GEN Rev. 1, 04/02
Standard Features
The system has the following standard features:
• (1) 3-button remote control w/ LCD text
display and background illumination
• Status indicator (LED)
• Program/Valet switch
• Remote Start capabilities
• Extended Range Transceiver
• Multi-tone siren (120dB)
• Dual stage shock sensor
• Remote panic
• Valet mode
• Remote chirp mute
• Remote sensor bypass
• Passive or active arming
• Stop & Go Feature
• Auto Cold Start
• 24 Hour Timer Start
• Flashing parking lights
• Auto Rearm
• Passive Arming
Optional Features
The system has many optional features that may
require additional parts and/or labor. Please
contact your dealer for more details.
• Remote keyless entry (Door lock/unlock)
• Illuminated entry
• Hood & trunk protection
• Horn honk
• Trunk/hatch release
• Window roll-up
• Back up battery
• Additional sensors
glass breakage
microwave
Note:
Some features may not be appropriate
for certain vehicles. Automatic transmission
and electronic fuel injection are required on
vehicles for use with this system.
FM SECURITY/REMOTE START SYSTEM
OWNERS
MANUAL
Transmitter Indications Continued
Valet mode -
The display will show VALET and
the icon to confirm entering
the Valet mode.
Start -
The display will show START to
indicate the ignition is turned
on and the engine is going to
crank.
Lock (Valet) -
If the doors are locked with the
transmitter in Valet mode, the
display will show VALET and the
icon to confirm locking.
Clock Set -
When entering the Clock Set
mode, the display will show
CLOCK then switch to the hour
and minute setting.
Unlock (Valet) -
If the doors are unlocked with
the transmitter in Valet mode,
the display will show VALET and
the icon to confirm locking.
Chirp Delete -
When Chirp Delete is selected
using the transmitter, the display
will show CHIRP and the icon
to confirm silent operation.
Alarm Clock Set -
When entering the Alarm Clock
Set mode, the display will also
show the icon to indicate
the Alarm Clock is on.
Start Timer Set -
When entering the Start Timer
Set mode, the display will show
the icon while setting the
Start Time. Once the Start time
is set, the icon is displayed
indicating the vehicle will start
at the programmed time.
Engine Run -
When the engine starts and
continues to run, the ENGINE
RUN will be displayed, and the
icon will remain on.
Transmitter Paging -
When the Call function is
activated from the vehicle, the
display will show .
Low Battery -
When the transmitter battery
needs replacement, the display
will flash the icon.
Confirmation Beep -
W h e n t h e t r a n s m i t t e r ' s
confirmation beep is turned on
or off, the the display will show
the or icon to indicate
the new setting.
