REMOTE KEYLESS ENTRY
BEFORE INSTALLING THIS PRODUCT PLEASE READ
THIS INSTALLATION MANUAL THOROUGHLY!!
INSTALLATION MANUAL
• This product must be installed by qualified per-
sonnel according to these instructions.
Items Included:
• Main unit
• Two 4-button remote transmitters
• Plug In LED
• Plug in program switch
• Main harness
• Owner’s manual
Before you begin the installation:
• Verify with the customer the desired location
for the program switch and LED.
• Always use a multimeter when verifying vehicle
wiring.
Installation Notes:
• Do not install the main unit in the engine com-
partment.
• Make all wiring connections to the vehicle
before connecting the main 15-pin connector har-
ness to the main unit.
• Mount the main unit in a secure area, away from
vehicle computers and heating/air conditioning
ducts.The location should be convenient for your
installation, but hidden from thieves. Mount the
unit as far away from metal objects as possible to
increase the range of the remote transmitters.
• When running the harness wires through the
vehicle, be careful to run them where they cannot
be damaged or shorted. Keep them away from any
moving parts or areas of high heat. Use rubber or
plastic grommets to protect the harness wires
where they pass through holes in metal panels.
Main Harness:
• BLACK WIRE - Ground input (-). Connect to a
solid chassis ground that is clean and free of
paint or dirt.
• RED WIRE - +12V battery input.
• WHITE WIRE - Parking light output (+).
Connect to the wire that shows +12V when the
parking lights are turned on. If the vehicle’s park-
ing light circuit exceeds 10A, a relay is required.
For vehicle’s with independent left and right parking
light circuits, the parking light wires must be connect-
ed using diodes to keep the circuits separate.
• VIOLET WIRE - Unlock #87 normally open
input 10A fuse. (see Door Lock Wiring Diagrams)
• BLUE/BLACK WIRE - Unlock #30 common
output. (see Door Lock Wiring Diagrams)
• BROWN/BLACK WIRE - Unlock #87A normal-
ly closed input. (see Door Lock Wiring Diagrams)
• VIOLET/BLACK WIRE - Lock #87 normally
open input 10A fuse. (see Door Lock Wiring
Diagrams)
