background image

Standard Features

The system has the following standard features:

• (1) 3-button LCD display remote control
• Status indicator (LED)
• Program/Valet switch
• Remote Start capabilities
• Extended Range Transceiver
• Valet mode
• Active arming
• Stop & Go Feature
• Auto Cold Start 
• Remote keyless entry (Door lock/unlock)
• Hood protection
• Doggie Door release
• Window roll-down

Note: Some features may not be appropriate
for certain vehicles. Automatic transmission
and electronic fuel injection are required on
vehicles for use with this system.

Security System Operation

ARMING OPERATION

To arm the system press
transmitter button 1:

• The siren will chirp

once.

• The parking lights will

flash once.

• The doors will lock*.
• The L.E.D. will turn solid for 2 seconds 

then start flashing slowly.

After 10

seconds the system is armed.

*

If Installed

DISARMING OPERATION
To disarm the system press
transmitter button 1.

• The siren will chirp

twice.*

• The parking lights will

flash twice.

1

K9 SECURITY/REMOTE START SYSTEM

OWNERS MANUAL

Press

Press

Summary of Contents for BW FM 200 K

Page 1: ...ertain vehicles Automatic transmission and electronic fuel injection are required on vehicles for use with this system Security System Operation ARMING OPERATION To arm the system press transmitter button 1 The siren will chirp once The parking lights will flash once The doors will lock The L E D will turn solid for 2 seconds then start flashing slowly After 10 seconds the system is armed If Insta...

Page 2: ...ed into the valet mode when parked inside a garage or being left for service Only start the vehicle in a well ventilated area Do not use in a closed garage or indoors Be sure to familiarize yourself with all features prior to using this product REMOTE STARTINGTHEVEHICLE To remote start the vehicle Press button 2 on the transmitter The siren chirps 3 times The parking lights turn on Approximately 2...

Page 3: ...the brake pedal Turn on the ignition Remote start the vehicle using the transmitter STOP AND GO The Stop and Go feature allows the vehicle to remain running without use of the ignition key during short stops To activate the Stop and Go feature 1 Press and hold the brake pedal 2 While pressing the brake pedal push transmitter button 1 The LED will flash rapidly The parking lights will flash four ti...

Page 4: ...hile away the icon will be displayed Arm Start Trunk K9 SECURITY REMOTE START SYSTEM Transmitter Operation ARM DIS ARM LOCK UNLOCK Button I II III II III Operation ARM DISARM PANIC Button To arm or disarm the system press button 1 To activate the panic feature press button 1 and hold for three seconds Doggie Door To activate the trunk output press button 3 STATUS CHECK To check current status of t...

Reviews: