Black Widow Security OEM UPGRADE, User Manual

1

Standard Features:

Combination LED / Valet switch
Multi-tone siren (115dB)
Dual stage impact detector
Active or passive arming

Optional Features:

Starter disable 
Flashing parking lights
Dome light control
Hood and trunk protection
Back-up battery w/charging circuit

Note:

Some features may require additional

parts and labor, and may not be appropriate for

certain vehicles. Consult your authorized dealer.

System Operation

ARMING OPERATION

To arm the system press the Lock button on

the factory transmitter:

• The siren will chirp once.

• The parking lights will flash once.

• The LED will start flashing slowly after

5 seconds and the system will be

armed.

30 seconds after Arming, if the system

detects a bad sensor or an open zone, the

siren will chirp and the parking lights will

flash 4 times to indicate a zone is open. The

system will ignore that input, but keep all

other areas protected.
While Armed, the system will trigger if:

• The doors are opened.

• The shock sensor detects an impact to

the vehicle.

• The hood or trunk is opened.* 

When triggered, the siren will sound, the

horn will honk*, and the parking lights will

flash* for 50 seconds.
If the same input triggers the system 4 times

during a single arming cycle, the system will

bypass that input, keeping the other zones

protected, until the next time the system is

armed.
If the shock sensor detects a light impact to

the vehicle, the siren will chirp 3 times to

warn away the potential intruder.
*

Optional Feature

PASSIVE ARMING

The passive arming feature automatically

arms the system after closing all doors.

The

Passive Arming feature may be enabled during

installation.

To arm the system passively:

1. Turn the ignition key off.

2. Exit the vehicle and close all doors.

• The LED flashes rapidly indicating

that the system is preparing to arm.

(The system can be armed manually

any time.)

• The siren will chirp 30 seconds after

the last door is closed to indicate the

system is armed. NOTE: Opening a

door resets the passive arming timer.

• The doors will lock.†

†

If Passive Locking was added during installation.
NOTE: Enabling the Passive Locking fetures also
enables the Passive Arming feature

OEM UPGRADE SERIES

VEHICLE SECURITY SYSTEM

Version 7.5