background image

1

5-BUTTON NETWORK SERIES

VEHICLE SECURITY SYSTEM

Standard Features:
Status indicator (green LED)
Valet / override switch
Multi-tone siren
Dual stage impact detector
Remote panic
Remote chirp mute 
Remote sensor/trigger bypass
Passive or active arming

Optional Features:
Flashing parking lights
Starter disable 
Keyless entry
Remote trunk or hatch release
Illuminated entry
Hood and trunk protection
Remote auto start
Power window roll up
Back-up battery w/charging circuit
Glass break sensor
Plug-in radar sensor

Note: Some features may require additional parts
and labor, and may not be appropriate for certain
vehicles. Consult your authorized dealer.

System Operation

ARMING OPERATION
To arm the system press transmitter button 1:

• The siren will chirp once.
• The parking lights will flash once.*
• The doors will lock.*
• The LED will turn solid for 10 seconds

then start flashing slowly.

After 10

seconds the system is armed.

After Arming, if the system detects a bad sensor
or an open zone, the siren will chirp 4 times to
indicate a zone is open. The system will ignore
that input, but keep all other areas protected.
While the system is Armed, the system will
trigger if:

• The doors are opened.
• The shock sensor detects an impact to

the vehicle.

• The hood or trunk is opened.

When triggered, the siren will sound, the horn
will honk, and the parking lights will flash. If the
system is triggered by the ignition, doors, hood,
or trunk, the system will alarm for 40 seconds.
If triggered by the sensor inputs, the system will
alarm for 20 seconds.* 
If the same input triggers the system 4 times
during a single arming cycle, the system will bypass
that input, keeping the other zones protected,
until the next time the system is armed.
If the shock sensor detects a light impact to the
car or the radar sensor detects an exterior
zone disturbance, the system win sound 5
chirps to warn away the potential intruder.

*

Optional Feature

Owner’s Manual

5-Button

Transmitter

Button 1

Button 3

Button 2

Button 4

Button 5

BW4150 Owners.qxd  6/5/03  11:53 AM  Page 1

Summary of Contents for BW 4150

Page 1: ...rmed AfterArming if the system detects a bad sensor or an open zone the siren will chirp 4 times to indicate a zone is open The system will ignore that input but keep all other areas protected While the system is Armed the system will trigger if The doors are opened The shock sensor detects an impact to the vehicle The hood or trunk is opened When triggered the siren will sound the horn will honk ...

Page 2: ...e TAMPER ALERT If the alarm was triggered while away from the vehicle the siren will chirp 3 times on disarming for tamper indication After disarming the alarm enter vehicle and turn ignition on The LED will flash the zone that was triggered 5 times see LED chart AUTO REARM The Auto Rearm feature allows the system to automatically re arm itself in the event the system is disarmed and a door is not...

Page 3: ...ren will chirp once The LED will turn on solid indicating the system is inValet Mode To exit Valet Mode 1 Turn the ignition key on 2 Press and hold the valet service mode switch for 3 seconds The LED will turn off The Siren will chirp 2 times OPTIONALTRUNK RELEASE Press button 3 for approximately 2 seconds to open the trunk OPTIONALTRUNK DISARM The trunk disarm feature allows the alarm to disarm a...

Page 4: ... press for remote start on second vehicle if using network port start module Transmitter Functions with Shift Key Button 5 pressed 3 times prior Button 1 not used Button 2 not used Button 3 Sensor Test Mode Button 4 not used OPTIONAL FEATURES Some features and options may require additional parts and labor and may not be appropriate for certain vehicles Dome light elimination Horn honk Dual stage ...

Reviews: