background image

WARRANTY

This product has 3 years warranty for manufacturing defects. The warranty period 
will be counted from the date of purchase of the product, according to purchase 
invoice. Product warranty only covers manufacturing defects, defects resulting from 
improper use, such as dropping, improper transportation, connection to the mains 
power supply not in compliance with the voltage specified in this manual, insertion 
of foreign objects and natural wear of parts and parts Such as plastic parts (caps, 
buttons, handles, latch locks, power cables, etc.) and metal parts (wires, motors, etc.). 
Also not covered are damages due to agents of nature, lightning, flood, sea, 
oxidation, humidity etc.). The product will lose its warranty if it presents defects, 
which after analysis by our technicians, are characterised as being improperly used, 
used for professional use or for the purpose for which it is not intended (according to 
the Owner's Manual). This warranty will be void if it is found that the device has been 
tampered with, has been repaired by a person or service not authorised by 
Blaupunkt. The guarantee is only valid with the receipt/invoice provided at purchase.

Blaupunkt undertakes to provide the above-mentioned services in the warranty 
period only in places where it maintains an authorised service. Consumers who are 
not located near an authorised service centre should be responsible for the costs and 
risks of transport to the authorised service of their choice.

Natural wear is not covered under warranty.

This product is for domestic use only.

Grass Trimmer GT1000 

INSTRUCTION MANUAL

To prevent injury or damage, read 
and follow all instructions in this 
manual before using the appliance.

0800 677 1923

customerservice@bp-tools.co.uk

www.bp-tools.co.uk

Imported and Distributed by SKN Innovations Ltd. for Blaupunkt

17 Northumberland Sq.

NE30 1PX

Registered in the UK - Company Number 10366861

SAVE THESE INSTRUCTIONS

Summary of Contents for GT1000











Reviews: