ITEM/ARTÍCULO #0217968
MODEL/MODELO #55427
UTILITY HANGER
PACKAGE CONTENTS/
HARDWARE CONTENTS/HARDWARE CONTENTS
SAFETY INFORMATION/
PREPARATION/
Estimated Installation Time: 20 minutes/
MOUNTING INSTRUCTIONS/
STUD MOUNT INSTALLATION/
Hanger
x2
Screw
x4
Anchor
x4
Toggle bolt
x2
WARNING: Electrical, plumbing or gas lines may be in wall. Before cutting, drilling or hammering, verify their location. If needed, contact your electrician,
plumber or service personnel.
Before beginning installation of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble, install or operate the product.
Tools Required for Assembly (not included): drill, 1/4 or 3/8 drill bit, ruler, PH2 screwdriver and pencil.
NOTE: There are 3 standard installation methods: stud mount, drywall mount, and masonry wall mount.
1.Locate studs and hold hanger (A) at desired height on wall with screw holes directly over center of stud.
Mark screw holes with pencil.
A
1
AA
BB
CC
AB14496
