background image

BX3763

2005-2015 Toyota Tacoma 

(Includes Prerunner)

Installation Instructions

292-2737 Rev. J 

Page 1 of 10 

11/19/14 

Please read BOTH these Installation Instructions and the General Instructions prior to 

installing or operating this equipment.

1.   Blue Ox

®

 towing products and accessories 

are intended to be installed by Blue Ox

®  

Dealers who are familiar with our products 

and have the equipment and knowledge 

necessary to do “fit work”. When necessary 

Blue Ox

®

 Dealers can be found at 

www.

blueox.com 

or by contacting our Customer 

Care Department at (402) 385-3051.

2.   Many Blue Ox

®

 baseplates are designed to 

use existing holes and hardware to mount 

the baseplate to the towed vehicle. Even 

though bolts are there, do not assume they 

are adequate for baseplate mounting. Always 

use hardware supplied in the hardware kit 

and existing hardware where specified in the 

installation instructions. 

Reference your vehicle owner’s 

manual for manufacturer’s towing 

specifications. 

Attachment Tab Height: 11.5”

Attachment Tab Width: 30.5"

Serial Number

If the front of your vehicle looks different 

than this, please call us at (402)385-3051.

!

Failure to read and follow these instructions 

could result in separation of the towed vehicle 

from the tow bar, causing property damage, 

loss of towed vehicle, personal injury or death.

WARNING

Bolt Size

Grade 5

Grade 8

1/4”

10

14

5/16”

19

29

3/8”

33

47

7/16”

54

78

1/2”

78

119

5/8”

154

230

3/4”

257

380

Bolt Torque Specifications 

Torque in Foot-Pounds for Inch Bolts

 

Bolt Torque Specifications 

Torque in Foot-Pounds for Metric Bolts 

Bolt Size Grade 8.8 Grade 10.9

6MM

6

8

8MM

16

22

10MM

31

40

12MM

54

70

14MM

89

117

16MM

161

230

18MM

222

318

Summary of Contents for BX3763











Reviews: