Blueridge KIT-BPK12 Instruction Manual Download

Page: 1 / 4

Concealed Duct Plenum Kits

Instruction Manual

Thank you for purchasing a ductboard plenum kit from Alpine Home Air Products. These kits
consist of two pre-cut pieces of ductboard material

and two 28 Gauge S-Cleats

, from which you

can make a Supply and Return plenum for your Blueridge Concealed Duct unit. These kits are
correctly sized to fit the unit you purchased.

What you will need:

● Blueridge concealed duct kit
● Ductboard knife (serrated edge)
● Foil tape
●

Duct Sealant

KIT-BPK12
KIT-BPK18
KIT-BPK24
KIT-BPK36

Summary of Contents for KIT-BPK12

Page 1: ...e cut pieces of ductboard material and two 28 Gauge S Cleats from which you can make a Supply and Return plenum for your Blueridge Concealed Duct unit These kits are correctly sized to fit the unit yo...

Page 2: ...1 Supply Return ductboard with V trench cuts Ductboard end cap piece 2 x2 28 Gauge S Cleat Color legend Red Guide line for separating Supply and Return Green Insulation removed to leave a 2 overlap of...

Page 3: ...the plenum Be sure the joint is as depicted above and the resulting plenum shape has 4 right angles Step 4 Attach the end cap by inserting the insulation side into either end of the supply plenum If...

Page 4: ...h duct Step 8 Attach the Supply plenum to the concealed duct fitting around the flange Attach with S Cleats and seal with mastic Put one S Cleat on top of the plenum above the flange and you ll screw...