BOLT
®
Lock
Step 1:
Instructions for Coding the BOLT
®
Lock to your ignition key:
1.1 Read and remove warning
sticker - remove key from
key chain
1.2
(Insert key - Do not pull up/
down on key while coding)
While maintaining full key
insertion, turn the key
clockwise until it stops
1.3 The lock is now successfully
coded - Cycle Lock 3x to
ensure that the lock was
properly coded
Strap
Plate
Bolt
1/2”- 20 x
1
3/4”
Pin
1
7/8
”
Ball
2
5/16”
Ball
Items:
oFF VEHICLE
CoUPLER LoCK
FoR SPanISH and FREnCH tRanSLatIonS go to:
HttP://www.boLtLoCK.Com/aboUt-StRattEC/boLt-LItERatURE
LoS tRadUCtoRES aL ESPañoL y FRanCéS PUEdEn VISItaR:
HttP://www.boLtLoCK.Com/aboUt-StRattEC/boLt-LItERatURE
PoUR LES tRadUCtIonS En ESPagnoL Et En FRançaIS, aLLEz à :
HttP://www.boLtLoCK.Com/aboUt-StRattEC/boLt-LItERatURE
