Bonnet B-CAP.IN5 Installation Instructions Manual Download

Page: 1 / 7

READY-TO-INSTALL

5 KW

INDUCTION

& WOK

MANUFACTURER’S INSTRUCTIONS

Part A: Technical data

Part B: Installation instructions

- WARNING -

•

Installation and repairs must be carried out by personnel approved by the manufacturer and in

accordance with current regulations and standards.

•

If any modifications are made the manufacturer can accept no responsibility whatsoever.

•

These appliances must be used in a well-ventilated area.

•

Read the notice carefully before installation.

•

The unit must be kept on its base for handling until it is in its final location.

N° 390526NI

Summary of Contents for B-CAP.IN5

Page 1: ...ersonnel approved by the manufacturer and in accordance with current regulations and standards If any modifications are made the manufacturer can accept no responsibility whatsoever These appliances must be used in a well ventilated area Read the notice carefully before installation The unit must be kept on its base for handling until it is in its final location N 390526NI 9 ...

Page 2: ...ns 77292 MITRY MORY Cedex CONTENTS 5 KW INDUCTION WOK A TECHNICAL DATA 2 B FITTER S INSTRUCTIONS 1 Location of the identification plate 4 2 Installation General features 5 2 1 General requirements 5 2 2 Handling 5 2 3 Unpacking 5 2 4 Installation 5 3 Installation Connections 6 3 1 Electrical connections 6 ...

Page 5: ...2 MITRY MORY Cedex 1 IDENTIFICATION PLATE The identification plate is fixed under the equipment about the back part see the diagrams below In any correspondence about your equipment please quote The model number Model The serial number Fab Nr The date Date Identification plate Location of the identification plate ...