M a i n t e n a n c e
Instructioncard
T o u r l o c k 1 2 0 / 2 2
Dealer
Boon Edam B.V. P.O. Box 40, 1135 ZG Edam Holland.
For further information: consult the operating manual.
Tourlock 120/22
Version :
Issue :
Safety- and users instructions
Control panel*
Security devices
Maintenance
S e c u r i t y d e v i c e s
1 Contactmat
2 Hangsensor*
3 Weightsensor*
4 Failsecure*
5 Fail emergency unlocking*
Caution!
Don‘t use water near the drive- units and controlboxes.
Warning!
Switch OFF the power supply of the Tourlock120/22 during
maintenance or other work.
Weekly:
Clean the anodised, stove enamelled and/or stainless steel
surfaces with a wet cloth.
Monthly:
Clean the anodised, stove enamelled and/or stainless steel
surfaces with a wet cloth and a non- aggressive soap.
Vacuum clean all the brushes.
Yearly:
The Tourlock120/22 needs a major maintenance check
once a year. This has to be done by Boon Edam or an
approved agent. This applies as well for repairs.
Check the emergency- and safety devices and the general
function of the Tourlock120/22 daily!
Explanation of the symbols
Doorset rotates 120°ACW
Doorset rotates 120°CW
Doorset rotates manually
Doorset will be blocked in
the failsecure mode
Doorset completes
120°-cycle ACW
Doorset reverses CW
Doorset is locked
120
120
Max. admissible weight of 110 kg,
(Weightsensor)
Authorization after using card
reader
3x Authorization at most after
using card reader
Passage possible within 9 seconds
No power supply
Acoustic signal
Option
10 kg
>1
max. 3x
9 sec.
?
Secured side
Non secured side
2014/01/31
TL120/22-INS-UK
