16
| English
1 609 92A 32T | (22.6.16)
Bosch Power Tools
English
Safety Notes
All instructions must be read and observed
in order to work safely with the measuring
tool. The integrated protections in the
measuring tool may be compromised if the
measuring tool is not used in accordance
with the instructions provided. Never make warning signs
on the measuring tool unrecognisable. STORE THESE IN-
STRUCTIONS IN A SAFE PLACE AND INCLUDE THEM WITH
THE MEASURING TOOL WHEN GIVING IT TO A THIRD PAR-
TY.
Caution – The use of other operating or adjusting
equipment or the application of other processing meth-
ods than those mentioned here can lead to dangerous
radiation exposure.
The measuring tool is provided with a warning label
(marked with number 12 in the representation of the
measuring tool on the graphics page).
If the text of the warning label is not in your national
language, stick the provided warning label in your na-
tional language over it before operating for the first
time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance.
You could blind
somebody, cause accidents or damage
your eyes.
If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
Do not make any modifications to the laser equipment.
Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun glasses or in
traffic.
The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
Have the measuring tool repaired only through quali-
fied specialists using original spare parts.
This ensures
that the safety of the measuring tool is maintained.
Do not allow children to use the laser measuring tool
without supervision.
They could unintentionally blind
other persons or themselves.
Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts.
Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Keep the measuring tool and the rotating
mount 13 away from cardiac pacemakers.
The magnets inside the measuring tool and the
rotating mount generate a field that can impair
the function of cardiac pacemakers.
Keep the measuring tool and the rotating mount 13
away from magnetic data media and magnetically sen-
sitive equipment.
The effect of the magnets inside the
measuring tool and the rotating mount can lead to irrevers-
ible data loss.
Product Description and Specifica-
tions
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.
Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines as well as plumb points.
Product Features
The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
1
Exit opening for laser beam
2
On/Off switch
3
Battery capacity indicator
4
Working without automatic levelling indicator
5
Button for “laser point” operating mode
6
Button for “laser line” operating mode
7
Battery lid
8
Guide groove
9
Tripod mount 1/4"
10
Tripod mount 5/8"
11
Serial number
12
Laser warning label
13
Rotating mount(RM 1)
14
Guide rail
15
Fastening slot
16
Magnets
17
Ceiling clip*
18
Universal holder (BM 1)*
19
Protective pouch*
20
Case*
21
Inlay*
22
Laser target plate*
23
Construction tripod (BT 150)*
GCL 2-15
GCL 2-15 G
OBJ_BUCH-2637-002.book Page 16 Wednesday, June 22, 2016 4:13 PM
