Getting started guide
Edge Evo Floor Stand
DESIGNED FOR DIGITAL USE ONLY
Unlock
Lock
1. Feed cable up through the
hinge pole. Ensure enough
length is fed through to
easily plug into your tablet.
2. Slide the hinge pole onto
the base pole while feeding
the cable through. Screw in
.
grub screws to secure.
3. Screw on baseplate with
.
screws with the charging
cable running underneath.
5. Unlock the security lock
with the L shape key and slide
the clamp out.
6. If you are running a
charging cable through the
stand, remove the cable cover
clip before step 7.
7. Plug in the charging cable
and squeeze the tablet into the
clamp with the cable running
behind the tablet.
8. Re-attach the clamp arm by
sliding in and squeezing tablet.
9. Remain holding clamp
together until you have rotated
the security lock with the L
shape key into the lock position.
4. Locate the Edge case
and attach to the hinge and
screw in the screws
to secure.
